Microsoft Windows

Open Source

This ZenPack is developed and supported by Zenoss Inc. Contact Zenoss to request more information regarding this or any other ZenPacks. Click here to view all available Zenoss Open Source ZenPacks.

Microsoft Windows ZenPack

Monitoring for Microsoft Windows Devices.



This ZenPack provides support for monitoring Microsoft Windows. Monitoring is performed using the Windows Remote Management (WinRM) and Windows Remote Shell (WinRS) to collect Windows Management Instrumentation (WMI) and Perfmon data.

This ZenPack supersedes the earlier ZenPack named ZenPacks.zenoss.WindowsMonitor. If you have ZenPacks.zenoss.WindowsMonitor installed on your system, please read the Transitioning from WindowsMonitor section below.


Version 3.0.1- Download
          Released on 2021/08/31
          Requires PythonCollector ZenPack, ZenPackLib ZenPack
          Compatible with Zenoss 6.x and Zenoss Cloud

Version 2.9.4- Download
Released on 2019/06/27
Requires PythonCollector ZenPack, ZenPackLib ZenPack
Compatible with Zenoss 4.2.x - 5.3.x
Version 2.8.3- Download
Released on 2017/12/13
Requires PythonCollector ZenPack, ZenPackLib ZenPack
Compatible with Zenoss 4.2.x - 5.3.x


The features added by this ZenPack can be summarized as follows. They are each detailed further below.

  • Initial discovery and periodic remodeling of relevant components.
  • Performance monitoring.
  • Event management.
  • Custom commands.
  • Service monitoring.


The following components will be automatically discovered through the Windows server address, username and password you provide. The properties and relationships will be periodically updated by modeling.

Server (Device)
Attributes: Name, Contact, Description, Serial Number, Tag, Hardware Model, Physical Memory, Total Virtual Memory, Operating System, Cluster
Relationships: File Systems, Hard Disks, Processes, Network Routes, CPUs, Interfaces, Windows Services, HyperV, SQL Server Instances, IIS Sites
Cluster (Device)
Attributes: Name, Contact, Description, Physical Memory, Total Virtual Memory, Operating System, Member Servers
Relationships: SQL Server Instances, IIS Sites, Cluster Services, Cluster Resources, Cluster Networks, Cluster Disks, Cluster Interfaces, Cluster Nodes
Attributes: Name, Description, Model, Socket, Cores, Threads, Clock Speed, External Speed, Voltage, L1 Cache Size, L2 Cache Size and Speed, L3 Cache Size and Speed
Relationships: Device

Hard Disks
Attributes: Name, Size, Number of Partitions, Disk Ids, Free Space, Capabilities
Relationships: Device, File Systems

File Systems

Attributes: Mount Point, Status, Storage Device, Type, Block Size, Total Blocks, Total Bytes, Maximum Name Length
Relationships: Device, Hard Disks

Attributes: Name, Description, MAC Address, MTU, Speed, Duplex, Type, Administrative Status, Operational Status, IP Addresses
Relationships: Device
Network Routes
Attributes: Destination, Next Hop, Interface, Protocol, Type
Relationships: Device

Process Sets
Attributes: Name, Recent Matches, Process Class
Relationships: Device
Attributes: Name, Vendor, Installation Date
Relationships: Device
Attributes: Name, Display Name, Start Mode, Account
Relationships: Device

Cluster Services
Attributes: Name, Core Group, Owner Node, State, Description, Priority
Relationships: Cluster Resources
Cluster Resources
Attributes: Name, Owner Node, Description, Owner Group, State
Relationships: Cluster Service
Cluster Nodes
Attributes: Name, Assigned Vote, Current Vote, State :
Relationships: Cluster Disks, Cluster Interfaces
Cluster Networks
Attributes: Name, Description, State
Cluster Disks
Attributes: Name, Owner Node, Volume Path, Disk Number, Partition Number, Capacity, Free Space, State
Relationships: Cluster Nodes

Note: If a cluster disk has not been allocated, there are no partitions, so the representation of free space is invalid. We will therefore show free space as N/A. Disk number will not be discovered on Windows 2008 servers because the Powershell Storage Module is not available.

Cluster Interfaces
Attributes: Name, Owner Node, Network, IP Addresses, Adapter, State
Relationships: Cluster Nodes
IIS Sites
Attributes: Name, Status, App Pool
Relationships: Device
SQL Instances
Attributes: Name : Name, Instance Name, SQL Server Version, Backup Devices, Roles, Cluster Node Server, Perfmon Counter Instance Name
Relationships: Device, SQL Backups, SQL Databases, SQL Jobs, SQL Availability Groups, SQL Availability Replicas

SQL Databases
Attributes: Name, Owner, Database Status, Synchronization State, Suspended, Cluster Node Server, Last Backup, System Object, Recovery Model, Created On, Always On Unique ID, File Group, Version, Collation, File Path, Last Log Backup, Accessible
Relationships: SQL Server Instance, SQL Availability Group Replica
SQL Backups
Attributes: Name, Device Type, Instance Name, Physical Location, Status
Relationships: SQL Instance
SQL Jobs
Attributes: Name, Enabled, Cluster Node Server, Description, Date Created, User, Job ID, Instance Name
Relationships: SQL Instance

SQL Availability Group

Attributes: Name, State, Synchronization Health, Primary Recovery Health, Health Check Timeout, Automated Backup Preference, Quorum State, Database Level Health Detection, Is distributed, SQL Instances, Cluster Node Server, Perfmon Counter Instance Name, Unique ID, Cluster Type, Instance Name, Owner Node IP, Failure condition level
Relationships: SQL Instance, SQL Availability Group Replicas, SQL Availability Group Listeners

SQL Availability Group Replica

Attributes: Name, State, Role, Failover Mode, Operational State, Availability Mode, Synchronization Health, Synchronization State, Connection State, Cluster Node Server, Perfmon Counter Instance Name, Unique ID, Instance Name, Owner Node IP, Endpoint Url
Relationships: SQL Availability Group, SQL Instance, SQL Databases

SQL Availability Group Listener

Attributes: Name, DNS Name, State, IP Address, Port Number, Unique ID, Network Mode
Relationships: SQL Availability Group

Note: MS SQL Always On components only supported at /Server/Microsoft/Cluster level when WinMSSQL modeller plugin is added, and the value of zSQLAlwaysOnEnabled property set to True.

Note: In order to get most info about Replicas and Availability Databases it needs to set a 'possible nodes' for Availability Group resource. In this case collection will be performed per each checked node from possible nodes list. However, even one node is sufficient for the collection.

In order to do this:

  • Run 'Failover Cluster Manager';
  • Select the Role which correspond to particular Always On Availability Group;
  • Select 'SQL Server Availability Group' resource type for this resource;
  • Pick 'Advanced Policies' tab and check 'Possible Owners'.

Performance Monitoring

Performance counters are collected using the PowerShell Get-Counter Cmdlet within a remote shell (WinRS). The following metrics will be collected every 5 minutes by default. Any other Windows Perfmon counters can also be collected by adding them to the appropriate monitoring template.

\Memory\Available bytes
\Memory\Committed Bytes
\Memory\Pages Input/sec
\Memory\Pages Output/sec
\Paging File(_Total)\% Usage
\Processor(_Total)\% Privileged Time
\Processor(_Total)\% Processor Time
\Processor(_Total)\% User Time
\System\System Up Time
File Systems
\LogicalDisk({$here/instance_name})\Disk Read Bytes/sec
\LogicalDisk({$here/instance_name})\% Disk Read Time
\LogicalDisk({$here/instance_name})\Disk Write Bytes/sec
\LogicalDisk({$here/instance_name})\% Disk Write Time
\LogicalDisk({$here/instance_name})\Free Megabytes
Hard Disks
\PhysicalDisk({$here/instance_name})\Disk Read Bytes/sec
\PhysicalDisk({$here/instance_name})\% Disk Read Time
\PhysicalDisk({$here/instance_name})\Disk Write Bytes/sec
\PhysicalDisk({$here/instance_name})\% Disk Write Time
\Network Interface(${here/instance_name})\Bytes Received/sec
\Network Interface(${here/instance_name})\Bytes Sent/sec
\Network Interface(${here/instance_name})\Packets Received Errors
\Network Interface(${here/instance_name})\Packets Received/sec
\Network Interface(${here/instance_name})\Packets Outbound Errors
\Network Interface(${here/instance_name})\Packets Sent/sec
Interfaces on Windows 2012 and later
\Network Adapter(${here/instance_name})\Bytes Received/sec
\Network Adapter(${here/instance_name})\Bytes Sent/sec
\Network Adapter(${here/instance_name})\Packets Received Errors
\Network Adapter(${here/instance_name})\Packets Received/sec
\Network Adapter(${here/instance_name})\Packets Outbound Errors
\Network Adapter(${here/instance_name})\Packets Sent/sec
Active Directory
\NTDS\DS Client Binds/sec
\NTDS\DS Directory Reads/sec
\NTDS\DS Directory Searches/sec
\NTDS\DS Directory Writes/sec
\NTDS\DS Monitor List Size
\NTDS\DS Name Cache hit rate
\NTDS\DS Notify Queue Size
\NTDS\DS Search sub-operations/sec
\NTDS\DS Server Binds/sec
\NTDS\DS Server Name Translations/sec
\NTDS\DS Threads in Use
\NTDS\KDC AS Requests
\NTDS\KDC TGS Requests
\NTDS\Kerberos Authentications
\NTDS\LDAP Active Threads
\NTDS\LDAP Bind Time
\NTDS\LDAP Client Sessions
\NTDS\LDAP Closed Connections/sec
\NTDS\LDAP New Connections/sec
\NTDS\LDAP New SSL Connections/sec
\NTDS\LDAP Searches/sec
\NTDS\LDAP Successful Binds/sec
\NTDS\LDAP UDP operations/sec
\NTDS\LDAP Writes/sec
\NTDS\NTLM Authentications

Note: The Active Directory monitoring template will only be used when the server has the Primary or Backup Domain Controller role.

Exchange 2007 & 2010
\MSExchangeIS Mailbox(_Total)\Folder opens/sec
\MSExchangeIS Mailbox(_Total)\Local delivery rate
\MSExchangeIS Mailbox(_Total)\Message Opens/sec
\MSExchangeIS\RPC Averaged Latency
\MSExchangeIS\RPC Operations/sec
\MSExchangeIS\RPC Requests
\MSExchangeTransport Queues(_Total)\Active Mailbox Delivery Queue Length
\MSExchangeTransport SmtpSend(_Total)\Messages Sent/sec
Exchange 2013
\MSExchangeIS Store(_Total)\Folders opened/sec
\MSExchangeIS Store(_Total)\Messages Delivered/sec
\MSExchangeIS Store(_Total)\Messages opened/sec
\MSExchange Store Interface(_Total)\RPC Latency average (msec)
\MSExchange Store Interface(_Total)\RPC Requests sent/sec
\MSExchange Store Interface(_Total)\RPC Requests sent
\MSExchangeTransport Queues(_Total)\Active Mailbox Delivery Queue Length
\MSExchange Delivery SmtpSend(_Total)\Messages Sent/sec

Note: If monitoring Exchange with a non-administrator user, the user must be a member of the Active Directory group "Exchange View-Only Administrators" for pre-2010 Exchange installations or "View Only Organization Management" for 2010 and later installations.

Note: IIS Management Scripts and Tools needs to be installed on the server side in order to model and monitor IIS sites. This is done through the Add Roles and Features tool on the Windows Server under Web Server -> Management Tools -> IIS Management Scripts and Tools.

\Web Service(_Total)\Bytes Received/sec
\Web Service(_Total)\Bytes Sent/sec
\Web Service(_Total)\CGI Requests/sec
\Web Service(_Total)\Connection Attempts/sec
\Web Service(_Total)\Copy Requests/sec
\Web Service(_Total)\Delete Requests/sec
\Web Service(_Total)\Files Received/sec
\Web Service(_Total)\Files Sent/sec
\Web Service(_Total)\Get Requests/sec
\Web Service(_Total)\Head Requests/sec
\Web Service(_Total)\ISAPI Extension Requests/sec
\Web Service(_Total)\Lock Requests/sec
\Web Service(_Total)\Mkcol Requests/sec
\Web Service(_Total)\Move Requests/sec
\Web Service(_Total)\Options Requests/sec
\Web Service(_Total)\Other Request Methods/sec
\Web Service(_Total)\Post Requests/sec
\Web Service(_Total)\Propfind Requests/sec
\Web Service(_Total)\Proppatch Requests/sec
\Web Service(_Total)\Put Requests/sec
\Web Service(_Total)\Search Requests/sec
\Web Service(_Total)\Trace Requests/sec
\Web Service(_Total)\Unlock Requests/sec
IIS Sites
\Web Service(${here/sitename})\Bytes Received/sec
\Web Service(${here/sitename})\Bytes Sent/sec
\Web Service(${here/sitename})\CGI Requests/sec
\Web Service(${here/sitename})\Connection Attempts/sec
\Web Service(${here/sitename})\Copy Requests/sec
\Web Service(${here/sitename})\Connection Attempts/sec
\Web Service(${here/sitename})\Delete Requests/sec
\Web Service(${here/sitename})\Files Received/sec
\Web Service(${here/sitename})\Files Sent/sec
\Web Service(${here/sitename})\Get Requests/sec
\Web Service(${here/sitename})\Head Requests/sec
\Web Service(${here/sitename})\ISAPI Extension Requests/sec
\Web Service(${here/sitename})\Lock Requests/sec
\Web Service(${here/sitename})\Mkcol Requests/sec
\Web Service(${here/sitename})\Move Requests/sec
\Web Service(${here/sitename})\Options Requests/sec
\Web Service(${here/sitename})\Other Request Methods/sec
\Web Service(${here/sitename})\Post Requests/sec
\Web Service(${here/sitename})\Propfind Requests/sec
\Web Service(${here/sitename})\Proppatch Requests/sec
\Web Service(${here/sitename})\Put Requests/sec
\Web Service(${here/sitename})\Search Requests/sec
\Web Service(${here/sitename})\Trace Requests/sec
\Web Service(${here/sitename})\Unlock Requests/sec
\APP_POOL_WAS(${here/apppool})\Current Application Pool State

Note: The IIS monitoring template will only be used when IIS is found during modeling.

Note: The IISAdmin service must be running in order to collect IIS data.

Processes (Win32_PerfFormattedData_PerfProc_Process)

Collected directly via WMI over WinRM.

SQL Server Instance - WinDBInstance template
\SQLServer:Buffer Manager\Buffer cache hit ratio
\SQLServer:Buffer Manager\Page life expectancy
\SQLServer:SQL Statistics\Batch Requests/Sec
\SQLServer:SQL Statistics\SQL Compilations/Sec
\SQLServer:SQL Statistics\SQL Re-Compilations/Sec
\SQLServer:General Statistics\User Connections
\SQLServer:Locks(_Total)\Lock Waits/Sec
\SQLServer:Access Methods\Page Splits/Sec
\SQLServer:General Statistic\Processes Blocked
\SQLServer:Buffer Manager\Checkpoint Pages/Sec
\SQLServer:Locks(_Total)\Number of Deadlocks/sec

Note: For a named instance, the counter instance will be \MSSQL$INSTANCE_NAME. To add custom SQL Server instance counters, create a Windows Perfmon datasource and datapoint with matching names and specify the counter as \${here/perfmon_instance}\counter name. During modeling, the plugin will assign the correct counter name.

We show the following graphs for an instance:

Buffer Cache Hit Ratio Page Life Expectancy Batch Requests Compilations Connections Lock Waits Page Splits Processes Blocked Checkpoint Pages Deadlocks

SQL Server Database - WinDatabase template
\Active Transactions
\Backup/Restore Throughput/sec
\Bulk Copy Rows/sec
\Bulk Copy Throughput/sec
\Cache Entries Count
\Cache Entries Pinned Count
\Cache Hit Ratio
\Cache Hit Ratio Base
\DBCC Logical Scan Bytes/sec
\Data File(s) Size (KB)
\Log Bytes Flushed/sec
\Log Cache Hit Ratio
\Log Cache Hit Ratio Base
\Log Cache Reads/sec
\Log File(s) Size (KB)
\Log File(s) Used Size (KB)
\Log Flush Wait Time
\Log Flush Waits/sec
\Log Flushes/sec
\Log Growths
\Percent Log Used
\Log Shrinks
\Log Truncations
\Percent Log Used
\Repl. Pending Xacts
\Repl. Trans. Rate
\Shrink Data Movement Bytes/sec

Collected via PowerShell SQL connection to server instance.

Database Statuses

AutoClosed - The database has been automatically closed.

EmergencyMode - The database is in emergency mode.
Inaccessible - The database is inaccessible. The server might be switched off or the network connection has been interrupted.
Normal - The database is available.
Offline - The database has been taken offline.
Recovering - The database is going through the recovery process.
RecoveryPending - The database is waiting to go through the recovery process.
Restoring - The database is going through the restore process.
Shutdown - The server on which the database resides has been shut down.
Standby - The database is in standby mode.
Suspect - The database has been marked as suspect. You will have to check the data, and the database might have to be restored from a backup.

'Normal' will send a clear event

'EmergencyMode', 'Suspect', 'Inaccessible' will send a critical event
'Shutdown', 'RecoveryPending', 'Restoring', 'Recovering', 'Standby', 'AutoClosed', 'Offline' will send Info events

Status can be multiple items from above. For example, taking a database offline will set the status to 'Offline, AutoClosed'. Transforms can be applied in the WinDatabaseStatus event mapping under /Status. You can raise/lower the severity of the status, or drop it altogether.

For example, to raise the severity of the Offline status:

if 'Offline' in evt.summary:
    evt.severity = 4

Note: Database status is discovered in the same PowerShell script as the database counters. While it is possible to use a different cycle time for status, we advise against that as it will add extra load onto the target device and could inadvertently skew memory/cpu usage.

The WinDBInstance monitoring template will also monitor the status of a SQL Server instance to inform the user if it is up or down.

The WinSQLJob monitoring template will monitor the status of a job on a SQL Server instance to inform the user if it has succeeded, failed, unknown, or other state.

Note: Collection errors are sent with the winrsCollectionMSSQLJob event class key. Use an event class mapping with or without a transform to forward the event to a specific event class. These include connection and other Powershell issues.

SQL Availability Group - WinAvailabilityGroup template


Collected via PowerShell SQL connection to server instance.

SQL Availability Group state indicators' info can be found here.

SQL Availability Group Replica - WinAvailabilityReplica template 

\\Bytes Received from Replica/sec
\\Bytes Sent to Replica/sec
\\Bytes Sent to Transport/sec
\\Flow Control Time (ms/sec)
\\Flow Control/sec
\\Receives from Replica/sec
\\Resent Messages/sec
\\Sends to Replica/sec
\\Sends to Transport/sec


The following thresholds are set by default on the device monitoring template and will trigger an alert if they are reached

  • CPU Utilization - 90% used
  • Paging File Usage - 95% used
  • Memory - 90% of total memory used

Event Management

Events are collected from a Windows event log using a powershell script which calls Get-WinEvent. Events collected through this mechanism will be timestamped based on the time they occurred within the Windows event log. Not by the time at which they were collected.

Log Level Equivalents

To monitor events, create a monitoring template with a "Windows EventLog" datasource. For the Event Log field put the name of event log (e.g. "System") that you are interested in, and in the EventQuery enter the filter for events. The filter can be either XPath XML taken from a Windows Event Viewer Custom View or a PowerShell Where-Object block. The max age field is only used the first time the datasource successfully runs. Subsequent runs will only pull events from the last successful polling cycle.

The default Get-WinEvent XML filter returns all events from the last polling cycle. This list can be searched for specific Ids, severity, or specific words in the message using PowerShell.

Custom Event Views

To use the xml query from a custom view in Windows Event Viewer, simply copy the xml and paste into the Event Query field of the event data source. Because we use a polling cycle to query the event log, any TimeCreated filter will be replaced by us to avoid duplicate events.

Zenoss highly recommends using XML when monitoring the Security log. It is more efficient and will put less of a burden on the device's resources. The Windows Security log can and most likely will contain many audit events. See the LogAlways below.

For example, a custom view that searches for events in the last hour, with severity of Warning or Critical, and Ids of 104, 110-115, 155 will result in the following XPath query:

    <Query Id="0" Path="Application">
        <Select Path="Application">*[System[(Level=1 or Level=3) and (EventID=104 or (EventID >= 110 and EventID <= 115) or EventID=155) and TimeCreated[timediff(@SystemTime) <= 3600000]]]</Select>

Simply copy this and paste into the eventlog datasource Event Query field and save. We will convert the TimeCreated query and the following filter will be used:

  <Query Id="0" Path="Application">
    <Select Path="Application">*[System[(Level=1  or Level=3) and (EventID=104 or  (EventID &gt;= 110 and EventID &lt;= 115)  or EventID=155) and TimeCreated[timediff(@SystemTime) &lt;= {time}]]]</Select>

{time} will automatically be replaced by the number of milliseconds since the last query.

Note: The max age field is only used the first time that the datasource is run. Subsequent queries will only look at events that have occurred since the last time this datasource was run. We write a timestamp to the registry location HKCU:\SOFTWARE\zenoss\logs\ to know when the last time the datasource executed. If you are testing a datasource and would like to reset this time, then simply remove the string value with your datasource name in the registry hive, \SOFTWARE\zenoss\logs\, for your user under HKEY_USERS.

Note: The script to search for events and return relevant data is approximately 3700 characters. Due to the Windows 8192 character limit on the shell, any XML or PowerShell queries will need to be less than 4400 characters.

Note: The query for servers with .NET 3.5 and later uses the Get-WinEvent PowerShell cmdlet. If your server does not have one of these later versions, we will revert to using the Get-EventLog cmdlet. It is recommended, but not required, to install .NET version 3.5 SP1 or higher. If you have a mix of these servers using the same Event Log Data Source, you can mix and match the differing powershell queries. e.g. { $$_.Id -eq 4001 -or $$_.EventId -eq 4001 }

Note: Collection errors are sent with the WindowsEventLogCollection event class key. Use an event class mapping with a transform to forward the event to a specific event class. These include connection and other Powershell issues.

Powershell Examples

To Target all events with a Warning or higher severity:

{ $$_.Level -le [System.Diagnostics.Eventing.Reader.StandardEventLevel]::Warning}

This query will return all events with a Level of LogAlways, Critical, Error, and Warning.

The full list of event levels can be found in the description of the Standard Event Level.

To target all events by a specific id or range:

{ $$_.Id -eq 4001 }

This query will return all events with an id of 4001 from a specific log.

Read more about the EventLogRecord class.

And to know more about writing PowerShell conditions, you could read this tutorial

LogAlways Warning

The Windows Security log could contain hundreds or thousands of security audit logs, which use the level of LogAlways. The query above is structured to look for "less than or equal" events, even though we are looking for events "greater than or equal" in severity. This is due to the fact that the Level is an enumeration where the integer values map to 1 = Critical, 2 = Error, 3 = Warning, etc. This means lower numbers indicate higher severity. However, the LogAlways event level evaluates to 0, which is obviously less than a 3(Warning). These events are typically Informational and will display if using the sample powershell query above. To work around this, you could add -and $$_.Level -gt [System.Diagnostics.Eventing.Reader.StandardEventLevel]::LogAlways into your powershell query or use the XML option described above.

For servers with pre-3.5 .NET installed

On some older Windows 2008 Server versions, you may not have .NET 3.5 or higher. These systems will use the Get-EventLog cmdlet instead, which returns a different class that does not contain the same named properties. See EventLogEntry for the full list.

For example,

{ $$_.EntryType -le [System.Diagnostics.EventLogEntryType]::Warning}

$$_ is the event object of EventLogEntry class. EntryType is the attribute which determines severity, and could contain one of the following values: Error, Warning, Information, SuccessAudit, or FailureAudit.

Note: This query is structured to look for "less than" although we are looking for events "greater than" in severity. This is because the EntryType is an enumeration where the integer values map to 1= Error, 2 = Warning, etc. This means lower numbers indicate higher severity.

Or to look for a specific event id:

{ $$_.Id -eq 4001}

Changing Event Severity

To change event severity follow the steps:

  1. Navigate to the desired event class to map the event, for example '/Status'.
  2. Edit the mapping instance
    1. Select the desired mapping instance and either double click or click the gear icon at the top of the pane.
    2. If the mapping does not exist:
      1. Create a new one by clicking the ''+'' button at the top of the pane
      2. Use the format of ProviderName_EventId for the mapping name and eventClassKey, e.g. EventService_1001
  3. Click on the 'Transforms' tab, add "evt.severity = NUM" where NUM is one of (0: Clear, 1: Debug, 2: Info, 3: Warning, 4: Error, 5: Critical) at the bottom
  4. click the ''Submit'' button

Custom Commands

You can use the custom command datasource in the Windows ZenPack to create custom data points, graphs and thresholds.

  • Use either DOS shell commands or Powershell script
    • Use any valid Windows executable or Powershell cmdlet.
    • Powershell commands separated by ;. Always end script with ;.
    • For tales eval, surround by single quotes. e.g. '${here/id}'.
    • For Powershell variables, use 2 $. e.g. $$myvar = 10.
    • There is a character limit of 8192 imposed by Microsoft. Zenoss header is ~450 characters so you have about 7500 characters for your script.
  • Use standard parser to parse the output or create your own
    • Nagios have the form =.
    • JSON - script must put data into JSON format.
    • Auto will save a returned value into a data point.
    • Create custom parser in $ZENOSS_HOME/Products/ZenRRD/parsers/.
  • Viewing script output
    • Create datapoint(s) to collect the data for graphing.
    • Create custom parser to send event or transform data.

Note: Avoid using double quotes in Write-Host argument strings. Coupled with Nagios parser it may lead to 'Custom Command Error' Critical events and 'No output from COMMAND plugin' messages in zenpython logs.

Example usage

Script with TALES expression
  1. Select a windows target device
  2. Navigate to Device (/Server/Microsoft)
  3. On the right side panel, click '+' to add a Windows Shell datasource
  4. Provide name (eg. custom) and type (Windows Shell) for the datasource
  5. Click View Edit and Details
  6. Set strategy to custom command
  7. Set parser to Nagios
  8. Uncheck Use Powershell
  9. Set script to echo OK^|value1=${here/zWinPerfmonInterval}
  10. Add data point to datasource called value1 which can be graphed
Using a custom parser

Logon to the zenoss server and create a python file called in /opt/zenoss/Products/ZenRRD/parsers and restart zenoss

The content of

from Products.ZenRRD.CommandParser import CommandParser
class test1(CommandParser):
    def processResults(self, cmd, result):{'summary': 'test1 parser event', 'severity': 5, 'test1.detail':})
  1. Select a windows target device.
  2. Navigate to the Device (/Server/Microsoft) Monitoring Template.
  3. On the Data Sources panel, click '+' to add a 'Windows Shell' datasource.
  4. Provide name (eg. custom) and type (Windows Shell) for the datasource.
  5. From the gear button, choose View Edit and Details.
  6. Set the strategy to Custom Command and Parser to test1
  7. Add a Windows command or Powershell script.
  8. Run zenpython to collect the data zenpython run -v10 -d <devicename>
  9. Check events after 5 minutes for the test1 event
Powershell Scripting using Auto parser
  1. Select a windows target device
  2. Navigate to Device (/Server/Microsoft)
  3. On the right side panel, click '+' to add a 'Windows Shell' datasource
  4. Provide name (eg. custom) and type (Windows Shell) for the datasource
  5. View Edit and Details : strategy ->custom command, parser is Auto, and tick the Use Powershell box
  6. Enter script. Be sure to use a double dollar sign, $$, in order to distinguish any powershell specific variables from a TALES expression.
  7. Add a datapoint to collect the return value from the script which you can then graph

Configuring Service Monitoring

There are multiple ways to configure Windows service monitoring depending on if you want to configure for a single service on a single server, a specific service across all Windows servers, all 'Auto' start services, or somewhere in between.

Name: Enter a name for the data source
Enabled: Enable or disable the data source
Severity: Choose the severity of the alert
Cycle Time: Frequency of how often the datasource will query service status
Update services immediately: Changes will be picked up during modeling. To have changes take effect immediately, check this box to start a job to index all services on all devices. This job could take several minutes to complete as it will update every service component on every Windows device in the system.
Service Options: Select the start type(s) to monitor. Add any services to include/exclude using a regex
Service Status: Choose to be alerted if a service is either not Running, not Stopped, not Paused, not Running or Paused, or not Stopped or Paused.

See the following examples:

Manually Enable or disable monitoring for a single service on a single server.
  1. Navigate to the service on the server.
  2. Click to select it.
  3. Select Details in the lower component pane.
  4. Choose the Fail
  5. Severity.
  6. Choose Monitoring from the gear menu.
  7. Choose Yes or
  8. No depending on what you want.

Note: Once monitoring has been enabled or disabled for a service, no monitoring template will apply. To reset this option for a service, uncheck the 'Manually Selected Monitor State' box in the Details of the service and save the change. This check box does not enable or disable monitoring for the service component.

Enable monitoring by default for the WinRM service wherever it is enabled.

Option 1

  1. Navigate to Advanced -> Monitoring Templates.
  2. Verify the list of templates is grouped by template.
  3. Expand the WinService tree.
  4. Click once to select the /Server/Microsoft copy.
  5. Choose Copy / Override Template from the Template gear menu at the bottom left of the page.
  6. Select /Server/Microsoft (Create Copy) from the target list then click submit.
  7. Expand the resulting copy_of_WinService tree.
  8. Select the /Server/Microsoft copy.
  9. Choose View and Edit Details from the Template gear menu at the bottom left of the page.
  10. Change the template's name to WinRM.
  11. Edit the datasource and optionally select the Update services immediately option.
  12. Tick the Auto checkbox under Service Options and click save.

Option 2

  1. Navigate to Infrastructure -> Windows Services.
  2. Locate the WinRM service.
  3. Select the start modes desired for this service.
  4. Enable monitoring by setting a Local Value.
  5. Optionally select a Local Failure Severity.
  6. Save.

Note: Setting a service to be monitored in this fashion will enable monitoring for the service regardless of device class.

Enable/Disable monitoring by default for the WinRM service for a select group of servers.
  1. Create a new device class somewhere under /Server/Microsoft/Windows for the select group of servers.
  2. Move the servers to the new device class.
  3. Follow steps 1-5 from the previous section to create a copy of the WinService template.
  4. Choose your new device class as the target then click submit.
  5. Expand the WinService tree then select the copy in your device class.
  6. Choose View and Edit Details from the gear menu at the bottom left of the page.
  7. Change the template's name to WinRM then click submit.
  8. Double-click to edit the *DefaultService' datasource.
  9. Optionally select the Update services immediately option. This will start a background job that could take several minutes to complete for a large number of Windows devices.
  10. Tick/Untick the Auto checkbox under Service Options and click save.
Enable monitoring of all services with a start mode of 'Auto'.
  1. Navigate to Advanced -> Monitoring Templates.
  2. Verify the list of templates is grouped by template.
  3. Expand the WinService tree.
  4. Select /Server/Microsoft.
  5. In the Data Sources pane, click the + button to add a new data source, give it a name, and choose Windows Service as the type.
  6. Choose View and Edit Details from the Data Sources gear menu.
  7. Optionally select the Update services immediately option. This will start a background job that could take several minutes to complete for a large number of Windows devices.
  8. Tick the Auto checkbox under Service Options and click save.
Create an organizer to monitor auto start SQL Server services.
  1. Navigate to Advanced -> Monitoring Templates.
  2. Verify the list of templates is grouped by template.
  3. Expand the WinService tree.
  4. Select /Server/Microsoft.
  5. In the Data Sources pane, click the + button to add a new data source, give it a name such as MSSQLSERVER, and choose Windows Service as the type.
  6. Choose View and Edit Details from the Data Sources gear menu.
  7. Optionally select the Update services immediately option. This will start a background job that could take several minutes to complete for a large number of Windows devices.
  8. Tick the Auto checkbox under Service Options.
  9. Enter +MSSQLSERVER.* into the "Inclusions(+)/Exclusions(-)" text box and click save.
The order of precedence for monitoring a service
  1. User manually sets monitoring.
  2. 'DefaultService' datasource from the WinService template associated with the service.
  3. Datasource other than the DefaultService in the WinService template associated with the service.
  4. Monitoring is enabled via the Infrastructure -> Windows Services page.
Windows Service Startmodes (Template vs Windows Services)
StartmodesTemplate includes Service startmodeTemplate excludes Service startmode
Windows Service Class includes Service startmodemonitoredmonitored
Windows Service Class excludes Service startmodemonitoredNOT monitored

Note: The Windows Service Template (default WinService) must have at least one datasource enabled for monitoring to function.

You can optionally include or exclude certain services to be monitored when selecting the Auto, Manual, and/or Disabled start mode(s) by entering a comma separated list of services. These can be the service names or a valid regular expression. Entered names and expressions are case insensitive. To exclude services, you must specify a '-' at the beginning of the name or regular expression. To include services, specify a '+' at the beginning of the name or regular expression. Exclusions will take precedence over inclusions, but the exclusions must be placed before the wildcard +.* inclusion.

Note: To enable monitoring by default of a service or services, you must choose a start mode by ticking the appropriate box. Unticking all three boxes disables monitoring by default.

Note: When saving changes to a service template and you choose to update services immediately, this will create a job to index all services on all devices. These changes may take several minutes to propagate to all of your devices depending upon the size of your organization. Updating is not recommended if you are making several changes in a short period of time. Updates are automatically applied at the time of the next model.

Note: During the time that the indexing of Windows Services job takes, any particular Windows Service could potentially still be monitored using a different datasource. Because of this, it is possible to see status event(s) using both the old and new severity.

Note: The Windows Service datasource no longer depends on the 'DefaultService' data source name. User defined datasources are now honored.


Beginning with version 2.4.0, you can now monitor the output of DCDiag. By default all dcdiag tests are enabled in the Active Directory monitoring template. If a test fails an error event is issued. You can also add other tests, such as DNS, and supply specific test parameters.

See DCDiag for more information.

Note: DCDiag must be run as a user with Administrator permissions. If you will be monitoring a Domain Controller with a non administrator user, you should disable these tests.


The Windows Zenpack monitors specific ports on domain controllers. By default, the ZenPack will monitor ports 9389, 3268, 3269, 88, 464, 389, 636, 445, 135, and 3389, as part of the Active Directory monitoring template.

You can add and remove any port you wish to be monitored by editing the PortCheck datasource in the Active Directory monitoring template.

To monitor ports on a Windows server that is not a domain controller, simply create a new datasource and choose Windows PortCheck as the type. Then add the ports you wish to monitor with a short description of each.

See Active Directory port usage for more information.

WinRM Ping

WinRM Ping is a simple datasource that will attempt to retrieve basic data over winrm. If the device cannot return a simple query, then Zenoss will view this device as being down. An event will appear in the /Status/Winrm/Ping event class with any resulting error message. This is a more comprehensive test than using a ping. A simple ping test could easily result in a false positive in many scenarios. The following are just a few:

  • A target's IP has been reassigned to a non-Windows device between models.
  • The winrm service has stopped and cannot be restarted.
  • The monitoring user account password has expired.

This datasource is not enabled by default.

Collector Daemons

  • zenpython


This ZenPack has the following requirements.

PythonCollector ZenPack
This ZenPack depends on PythonCollector being installed, and having the associated zenpython collector process running.
ZenPackLib ZenPack
This ZenPack depends on ZenPackLib being installed.

Note: During ZenPack installation, two jobs may be created, depending on which version is already installed. The first is a mandatory job that resets the python class types of existing Windows devices and components. This job will run if upgrading to v2.7.0 or above. The second is a job to remove incompatible Windows Services. This second job will run if upgrading to v2.7.2 or above. It is recommended to either stop zenjobs before installing or to wait until the job finishes before restarting Zenoss. If you restart before the job finishes, you may need to Abort and/or Delete the job after the restart. It is also possible to manually run this job by importing it into zendmd and adding it to the JobManager.

from import ResetClassTypes


Monitoring User Account

A monitoring user account must be either an Administrator or a least privileged user (LPU).

The Least Privileged User account requires the following privileges and permissions:

  • Enable, Method Execute, Read Security, Remote Access to the following WMI namespaces
    • "Root"
    • "Root/CIMv2"
    • "Root/DEFAULT"
    • "Root/RSOP"
    • "Root/RSOP/Computer"
    • "Root/WMI"
    • "Root/CIMv2/Security/MicrosoftTpm"
    • "Root/Webadministration" - If IIS is installed
  • Permission to use the winrm service
  • ReadPermissions, ReadKey, EnumerateSubKeys, QueryValues rights to the following registry keys
    • "HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Perflib"
    • "HKLM:\system\currentcontrolset\control\securepipeservers\winreg"
    • "HKLM:\SYSTEM\CurrentControlSet\Control\Class{4D36E972-E325-11CE-BFC1-08002bE10318}"
    • "HKLM:\SYSTEM\CurrentControlSet\Services\Blfp\Parameters\Adapters"
    • "HKLM:\Software\Wow6432Node\Microsoft\Microsoft SQL Server"
    • "HKLM:\Software\Microsoft\Microsoft SQL Server"
  • Membership in the following local groups or domain level groups for a Domain Controller
    • "Performance Monitor Users"
    • "Performance Log Users"
    • "Event Log Readers"
    • "Distributed COM Users"
    • "WinRMRemoteWMIUsers__" for Windows 2008, 2012
    • "Remote Management Users" for Windows 2016 and beyond
  • “Read Folder” access to "C:\Windows\system32\inetsrv\config" if it exists
  • Each service needs the following permissions

Note: An Administrator level user can be denied local logon and remote desktop access through a group policy object.

If using an LPU account, it is the responsibility of the Windows and network administrators of your organization to ensure that the above permissions are understood, in place, and maintained.

Port Requirements

The ZenPack communicates with a Windows device over port 5985 for HTTP or 5986 for HTTPS requests. Compatible ports of 80 and 443 are also acceptable. For domain authentication, Kerberos communicates on port 88 of the KDC and on port 749 of the Admin Server.

Note: If using the compatibility ports of 80 or 443, you must create the appropriate listener in your server's WinRM configuration.

Adding a Windows Device

Use the following steps to start monitoring a Windows server using local authentication in the Zenoss web interface.

  1. Navigate to the Infrastructure page.
  2. Select the Server/Microsoft/Windows device class.
    • The Windows server must be added to this class or to a child of this class.
  3. Click Details and set the configuration properties for zWinRMUser and zWinRMPassword.
  4. Click See All.
  5. Choose Add Single Device from the add device button.
  6. Fill out the form.
    • Name or IP must be resolvable and accessible from the collector server chosen in the Collector field.
  7. Click ADD.

Adding a Cluster Device

Use the following steps to start monitoring a Windows cluster using local authentication in the Zenoss web interface.

  1. Navigate to the Infrastructure page.
  2. Select the Server/Microsoft/Cluster device class.
    • The Windows cluster must be added to this class or to a child of this class.
  3. Click Details and set the configuration properties for zWinRMUser and zWinRMPassword.
  4. Click See All.
  5. Choose Add Single Device from the add device button.
  6. Fill out the form.
    • Name or IP must be resolvable and accessible from the collector server chosen in the Collector field.
  7. Click ADD.

Alternatively you can use zenbatchload to add Windows servers from the command line. To do this, you must create a text file with hostname, username and password of all the servers you want to add. Multiple endpoints can be added under the same /Devices/Server/Microsoft/Windows section. Here is an example...

/Devices/Server/Microsoft/Windows zWinRMUser="Administrator", zWinRMPassword="password" zWinRMUser="Administrator", zWinRMPassword="password"

You can then load the Windows servers into Zenoss Core or Resource Manager as devices with the following command.

zenbatchload <filename>

Configuration Options

The Adding a Windows Device steps shown above are for the simplest case of using Windows local authentication. The following configuration properties can be used to support monitoring other environments.

  • zWinRMUser
    The syntax used for zWinRMUser controls whether Zenoss will attempt Windows local authentication or domain (kerberos) authentication. If the value of zWinRMUser is username, local Windows authentication will be used. If zWinRMUser is, domain authentication will be used. The zWinKDC and potentially the zWinRMServerName properties become important.
  • zWinRMPassword
    Password for user defined by zWinRMUser.
  • zWinKDC
    The zWinKDC property must be set if domain authentication is used. It must be the IP address or resolvable name of a valid Windows domain controller. To use multiple KDCs, you can enter a comma separated list of valid addresses or supply different KDCs across different Device Classes. See the Kerberos Tickets section for more information.
  • zWinTrustedRealm
    Enter the name of the domain which is trusted by the user's domain. This can be a child or other domain which has a trust relationship with the user's domain. For example, if zWinRMUser is, and is a child of the example domain, enter into zWinTrustedRealm.
  • zWinTrustedKDC
    This property must be set if zWinTrustedRealm is set. It must be the IP address or resolvable name of a valid Windows domain controller for the trusted realm.
  • zWinRMServerName
    This property should only be used in conjunction with domain authentication when the DNS PTR record for a monitored server's managed IP address does not resolve to the name by which the server is known in Active Directory. For example, if myserver1 is known as by Active Directory and is being managed by IP address, but resolves to, you will have to set zWinRMServerName to for domain authentication to work.

    If many Windows servers in your environment don't have DNS PTR records that match Active Directory, it is recommended that you set the name of the Zenoss device's to be the fully-qualified Active Directory name and set zWinRMServerName to ${here/titleOrId} at the /Server/Microsoft/Windows device class. This avoids the necessity of setting zWinRMServerName on every device.

    If the server name cannot be resolved and you are using domain authentication, it is recommended that you set the Id of the device to the IP address and the Title to the server name it is known by in Active Directory. Then use ${here/title} for zWinRMServerName. This situation can occur when no DNS server is available. Kerberos always performs a reverse lookup when obtaining a ticket to use a service on a computer. If your servers are known by multiple names, the reverse lookup may return the wrong name and you will see "Server not found in kerberos database" errors. See the troubleshooting section on this topic for a solution.

  • zWinScheme
    This must be set to either http or https. The default is http.
  • zWinUseWsmanSPN
    If the HTTP/HTTPS service principals are exclusively in use for a particular service account, such as on an IIS server, set this option to true to use the WSMAN service principal name. You can use this option for all domain joined Windows Servers that are using a domain monitoring account.

    A domain controller may need “Validated write to service principal name” permission for the NETWORK SERVICE account in order for the WSMAN service principal name to be used.

  • zWinRMPort
    The port on which the Windows server is listening for WinRM or WS-Management connections. The default is 5985. It is uncommon for this to be configured as anything else.
  • zWinPerfmonInterval
    The default interval in seconds at which Windows Perfmon datapoints will be collected. The default is 300 seconds or 5 minutes. It is also possible to override the collection interval for individual counters.
  • zWinKeyTabFilePath
    This property is currently used and reserved for future use when keytab files are supported.
  • zDBInstances
    This setting is only relevant when the zenoss.winrm.WinMSSQL modeler plugin is enabled. Multiple instances can be specified to monitor multiple SQL Server instances per server using different credentials. The default instance is MSSQLSERVER. Fill in the user and password to use SQL authentication. Leave the user and password blank to use Windows authentication. The default MSSQLSERVER credentials will be used for all instances not specified. Microsoft recommends using Windows authentication to connect to SQL Server.
  • zWinRMEnvelopeSize
    This property is used when the winrm configuration setting for MaxEnvelopeSizekb exceeds the default of 512k. Some WMI queries return large amounts of data and this envelope size may need to be enlarged. A possible symptom of this is seeing an xml parsing error during collection, OperatingSystem modeler plugin timeout or "Check WMI namespace and DCOM permission" returned from it.
  • zWinRMLocale
    The locale to use for communicating with a Windows server. The default is en-US. This property is reserved for future use.
  • zWinRSCodePage
    The code page which is in use on the Windows Server for the monitoring user account. The default is to use 65001, the identifier for unicode. The full list is here: To determine the code page in use on a Windows server, run chcp at a command prompt.
  • zWinRMKrb5includedir
    Optional directory which contains one or more kerberos configuration files. This is useful when extra kerberos options are needed, such as disabling reverse dns lookup. See for a description of includedir and krb5.conf options available. The directory must exist and contain only kerberos configuration files. If the directory contains non-kerberos configuration files, it will be ignored.
  • zWinRMDisableRDNS
    Kerberos always performs a reverse lookup when obtaining a ticket to use the HTTP/HTTPS/WSMAN service principal. If there are multiple names by which servers are known in your organization, or if you do not want to use reverse lookups, set this value to True. Because this is a kerberos property, it can only be set one way or another. You cannot mix and match this value and only the top level value at /Server/Microsoft will be honored.
  • zWinRMClusterNodeClass
    Path under which to create cluster nodes. If you need to add cluster nodes to a specific class under the /Server/Microsoft/Windows device class, specify it with this property. The default is /Server/Microsoft/Windows
  • zWinRMKRBErrorThreshold
    Having a poor network connection can cause erroneous kerberos error events to be sent which could cause confusion or false alarms. The default value is 1, which will always send an event on the first occurrence of an error. You can increase this value to send an event only when there have been x amount of occurrences of an error during collection, where x denotes the threshold number.
  • zWindowsRemodelEventClassKeys
    Use in conjunction with schedule_remodel in ZenPacks.zenoss.Microsoft.Windows.actions to initiate a remodel of a Windows or Cluster Device. See the ClusterOwnerChange mapping in the /Status event class for example usage.
  • zWinRMConnectTimeout
    Used to define the time out for establishing a winrm connection. If you are seeing failing tasks stay in a RUNNING state, you can decrease this number so that the initial attempt to connect to a device times out sooner.
  • zWinServicesModeled

     List of regular expressions for services to model. If zWinServicesNotModeled is set, we will skip services from it first.

  • zWinServicesNotModeled

List of regular expressions for services to ignore during modeling process.

  • zSQLAlwaysOnEnabled

Set to true to enable modeling and monitoring of MS SQL Always On components.

  • zSQLAlwaysOnReplicaPerfdataNode

Availability Replicas performance data location windows node. Possible values: "local", "separate". Default: "separate"

  • zWinRMLongRunningCommandOperationTimeout

Operation timeout for Powershell long running command. Default value is slightly greater than zWinPerfmonInterval to allow each step of long running command to finish.

  • zWinRMConnectionCloseTime

Time when WinRM connections exist before it being closed. Needed for existing GSS client to decrypt leftover encrypted requests. Used only for domain (Kerberos) authentication.

Note: HyperV and MicrosoftWindows ZenPacks share krb5.conf file as well as tools for sending/receiving data. Therefore if either HyperV or Windows device has a correct zWinKDC setting, it will be used for another device as well.

Configuring MSSQL Server Modeling/Monitoring

Supported SQL Server versions
SQL Server 2008 *
SQL Server 2008 R2 *
SQL Server 2012
SQL Server 2014
SQL Server 2016
SQL Server 2017
SQL Server 2019


  • In order to properly monitor SQL Server, the Client Tools SDK must be installed for each version of SQL Server installed on your Windows servers.
  • Microsoft will be ending extended support for SQL Server 2008 and 2008 R2 on 7/9/2019. Please take appropriate action to monitor a supported version.
Support for SQL Server and Windows Authentication:
  • Windows Authentication: In zDBInstances property specify only SQL instances names, leave user and password fields blank. Microsoft prefers this authentication method.
  • SQL Server Authentication: In zDBInstances property provide user name and password for each SQL instance.
  • Specifying authentication per instance is no longer required with version 2.4.2 and above. We will use the credentials specified for the MSSQLSERVER instance by default.
  • For instances which contain hundreds of databases, you may need to increase zCollectorClientTimeout as this process may take a few minutes or more to complete.

Use the following steps to configure SQL Server Authentication on your SQL Server:

  1. Connect to SQL Instance using MSSQL Management Studio.
  2. Select instance Properties > Security and make sure that SQL Server and Windows Authentication mode is enabled.
  3. Open Security > Logins, select the user you specified in zDBInstances property or the zWinRMUser property if using Windows Authentication.
  4. Check user Properties > Status and make sure that the user is Enabled.
  5. Check user Properties > Server Roles and make sure that the user has the public role.
    1. If using an Administrator user, make sure it has the sysadmin role.
    2. If not using an Administrator user, check user Properties > Securables and make sure the user has been granted View server state rights.
Support for Local and Failover Cluster SQL instances:

This ZenPack adds support for both local and failover cluster SQL Server instances. Local SQL Server instances can be modeled/monitored within windows devices (devices in Server/Microsoft/Windows device class). SQL Server failover cluster instances can be modeled/monitored within cluster devices (devices in Server/Microsoft/Cluster device class).Use the following steps to model/monitor SQL Server instances:

  1. Create a device in Server/Microsoft/Windows device class if you intend to model local SQL instances, or in Server/Microsoft/Cluster device class if you intend to model failover cluster instances.
  2. Optionally specify the instance names to be modeled in zDBInstances zProperty. Provide user names and passwords if SQL Server Authentication is to be used.
  3. Enable zenoss.winrm.WinMSSQL modeler plugin.
  4. Remodel device.
SQL Server Monitoring

The monitoring templates for SQL Server are component templates so there is no need to perform a bind. They will automatically be used to monitor databases, instances, and jobs.Note: The default instance of MSSQLSERVER appears as the host name.Note: The authenticated user will need to be granted permission to view the server state. For example, "GRANT VIEW SERVER STATE TO 'MYDOMAIN\zenoss_user'" or through the GUI in SQL Server Management Studio. A Windows user must also be interactive, i.e. the account must not be denied local logon rights.

Working with WinCommand Notification Action - Deprecated

This ZenPack adds a new event notification action that can be used by the zenactiond daemon to allow an arbitrary command to be executed on the remote windows machine.Use the following steps to set up a notification:

  1. Select Events > Triggers from the Navigation Menu.
  2. Create a trigger, selecting the rules that define it.
  3. Select Notifications from the left panel. Add a new notification, enter a name for it and select WinCommand Action from the drop-down menu. Click Submit.
  4. In the Edit Notification dialog on the Notification tab associate the trigger with the notification and optionally select the notification properties (Enabled, Send Clear, Send only on Initial Occurrence, Delay, Repeat).
  5. On the Content tab of the notification specify the 'Windows CMD Command* to run when configured triggers are matched. You may optionally specify Clear Windows CMD Command to run when the triggering event clears.
  6. Submit changes.

Note: For Zenoss 5.x and up, all wincommands will run in the zenactiond container, which is located on the master host. The master may or may not have the same dns lookup capabilities as the collector(s). If using the winrs command with kerberos authentication, be sure to set the remote hostname to the FQDN of the device and use the --ipaddress option of winrs to specify the IP address of the device.For more information please refer to Working with Triggers and Notifications

Setting up WinRM Service for Target Windows Machines

Group Policy

Navigate to Computer Configuration\Policies\Administrative Templates\Windows Components\Windows Remote ManagementWinRMClient

  • No setting changes required for client


  • Allow remote server management through WinRm

HTTP (Windows default is HTTPS see note below for more information)

  • Allow unencrypted Traffic (Only necessary when using basic authentication)

Basic Authentication (Windows default is Kerberos see note below for more information)

  • Allow Basic Authentication

WinRS Computer Configuration\Policies\Administrative Templates\Windows Components\Windows Remote Shell

  • Allow Remote Shell Access
  • Max number of processes per shell = 4294967295 or a reasonable large number
  • Max number of shells per user = 5
  • Shell Timeout = 600000

Individual Machine configuration

  • Open ports 5985 (http)/5986(https) for WinRM
  • Run command prompt as Administrator
  • winrm quickconfig
  • winrm s winrm/config/service '@{MaxConcurrentOperationsPerUser="4294967295"}' or a reasonable large number
  • winrm s winrm/config/winrs '@{MaxShellsPerUser="5"}'
  • winrm s winrm/config/winrs '@{IdleTimeout="600000"}'

Basic Authentication (Windows default is Kerberos see note below for more information)

  • winrm s winrm/config/service/auth '@{Basic="true"}'
  • winrm s winrm/config/service '@{AllowUnencrypted="true"}'

Note: The IdleTimeout/Shell Timeout is the time, in milliseconds, to keep an idle remote shell alive on a Windows Server. It should be between 5-15 minutes. The winrshost.exe process is the remote shell on a Windows Server.

Note: The above instructions use the max values for MaxConcurrentOperationsPerUser. If you do not want to set this value to the max, then a value of 50 should be adequate. The default is 5, which will cause problems because Zenoss will open up concurrent requests for a set of Perfmon counters and any other shell based datasource.

Note: Starting from Windows ZenPack v.3.0.0 some monitoring operation were split into separate collection tasks. Hence, the number of WinRM shells may be increased. It may need to increase the MaxShellsPerUser to meet the new requirements. This is especially applicable for large environments.

Note: If you choose to use Basic authentication it is highly recommended that you also configure HTTPS. If you do not use the HTTPS protocol your user name and password will be sent over in clear text. If you have challenges setting up HTTPS on the Windows clients but require the user name and password to be encrypted, then using the Kerberos authentication is the best option. HTTPS is not required for Kerberos but is recommended. If you choose to use Kerberos authentication, then your payload will be encrypted.

Note: If you are using kerberos on EL6 and higher to connect to your Windows Server, your data will be encrypted over HTTP. For kerberos on EL5, encryption is not supported so you must set the winrm AllowUnencrypted option to true.

Note: If you choose to take the WinRM default configurations you must supply Kerberos authentication settings in the zProperties. The Kerberos authentication process requires a ticket granting server. In the Microsoft Active Directory environment the AD Server is also the KDC. The zWinKDC value must be set to the IP address of the AD Server and the collector must be able to send TCP/IP packets to this server. Once this is set your zWinRMUserName must be a FQDN such as and the zWinRMPassword must be set correctly for this user account. The domain name MUST be the name of the domain, not an alias for the domain.

Note: In order to use a single domain user in a child domain or other trusted domain, set zWinKDC to the AD server of the user's domain. Then enter the trusted domain name and associated domain controller in the zWinTrustedRealm and zWinTrustedKDC properties, respectively.

Note: The HTTPS setup must be completed on each client. At this time we do not have notes on automating this task but are currently in the process of testing several options. To successfully encrypt your payload between the Zenoss server and the Windows client you must install a Server Authentication certificate on the client machine. The process for requesting and installing the appropriate certificate can be found in the following technet article Once the client has the correct certificate installed you only need to change the zWinScheme to HTTPS and zWinRMPort to 5986. If you are still having challenges setting up HTTPS on the client you can execute the following command on any AD server to verify the appropriate SPN record exists for Kerberos authentication.

c:\>setspn -l hostname1

If you do not see a record with HTTPS/ at the beginning of the hostname you can create the record, but this is not typically necessary as Windows will use the HOST/ record as the default for most built in services. You can also use the zWinUseWsmanSPN property so that zenoss will use the WSMAN service principal. The WSMAN spn is created by running winrm quickconfig.

c:\>setspn -s HTTPS/ hostname1

Transitioning from WindowsMonitor

If you are installing this ZenPack on an existing Zenoss system or upgrading from an earlier Zenoss version you may have a ZenPack named ZenPacks.zenoss.WindowsMonitor already installed on your system. You can check this by navigating to Advanced -> ZenPacks.This ZenPack functionally supersedes ZenPacks.zenoss.WindowsMonitor for Windows platforms that support WinRM, but does not automatically migrate monitoring of your Microsoft Windows resources when installed. The ZenPacks can coexist gracefully to allow you time to manually transition monitoring to the newer ZenPack with better capabilities.

  1. Navigate to the Infrastructure page.
  2. Expand the Server/Windows/WMI device class.
  3. Single-click to select a Windows device.
  4. Click the delete (-) button in the bottom-left.
  5. Click OK to confirm deleting the Windows device.
  6. Add the device back using the Adding a Windows Device instructions above. Be sure to select the /Server/Microsoft/Windows device class and not the /Server/Windows/WMI device class.
  7. Repeat steps 3-6 for each Windows device.

Note: It is also possible to drag and drop selected Windows devices from one class to another. You will need to remodel the devices after the move.

Limitations of Current Release

The current release is known to have the following limitations.

  • Non-Cluster components are no longer valid on a Cluster device.
    Cluster devices should only use the OperatingSystem, WinCluster, and WinMSSQL modeler plugins because the nodes of a cluster may have differing components such as Interfaces, FileSystems and Processors. If you have upgraded from a version previous to 2.5.0, and you still have the following components you should remove them from your Cluster device: Interfaces/WindowsInterfaces, FileSystems, Processors, Services/Windows Services, Processes.
  • Support for team NICs is limited to Intel and Broadcom interfaces.
  • Individual NICs in a team are not monitored and will have a speed of 0. Monitoring them could cause threshold error events.
  • Starting with version 2.6.0 of the ZenPack, existing Windows Service components are no longer compatible. These will be removed upon installation. Once the device is modeled with the Services plugin enabled, Windows Service components will be discovered. Any existing monitoring templates will still apply. Any services that were manually selected to be monitored will not. See the section on Configuring Service Monitoring.
  • The current release of this ZenPack uses the ZenPack SDK. Some component classes have changed from pre-2.6.x versions of the ZenPack. During installation, the ZenPack will create a job that will update the Windows Devices and Components class types used by the SDK. Depending on your Zenoss instance resources, this job could take a very long time to complete. If the job, ResetClassTypes, was not added during installation, it can be added manually using zendmd:
In [1]: from import ResetClassTypes
In [2]: dmd.JobManager.addJob(ResetClassTypes)
In [3]: commit()
  • When removing a Windows device or the Microsoft.Windows ZenPack, you may see errors in the event.log. This is expected and is a known defect in ZenPackLib.
  • If upgrading from a version prior to 2.6.3 to 2.7.x, you may not be able to view your Windows services until the device is remodeled.
  • Use of double quotes in Write-Host string arguments inside Windows Shell Custom Command datasources coupled with Nagios parser may lead to 'Custom Command Error' Critical events and 'No output from COMMAND plugin' messages in zenpython logs
  • You may see warnings of a catalog consistency check during install/upgrade. This is a known issue in ZenPackLib.
  • If you see duplicated Software items or Software items with manufacturer wrongly set to 'Unknown', please delete these items at Infrastructure -> Manufacturers page.
  • The WinCommand notification action is in the process of being deprecated.
  • Availability Replicas for particular Availability Group might disappear if all SQL Instances for this Availability Group will be stopped or unreachable. This will happen only if such outage occurs during modeling cycle (which occurs every 24 hours by default).

A current list of known issues related to this ZenPack can be found with this JIRA query. You must be logged into JIRA to run this query. If you don't already have a JIRA account, you can create one here.

Kerberos Tickets

The ZenPack will automatically generate a kerberos configuration file, krb5.conf, in the $ZENHOME/var/krb5/ directory. To use a custom configuration file, place it in the $ZENHOME/var/krb5/config/ directory. In Zenoss 5.x, this location is in a container so you will need to be certain to commit any changes made. Upgrading Zenoss will lose these changes, so you will need to update your container after upgrade. The file name can be anything that contains alphanumeric, dashes, and underscores.To add a permanent location for you configuration file, you can make use of the zWinRMKrb5includedir property. This must be a location accessible from within a container and contain ONLY kerberos configuration file(s). If the location is invalid or contains files other than kerberos configuration files, it will be ignored and not added to the main krb5.conf file.Example:A common problem with Kerberos is that a reverse DNS lookup will result in multiple records returned, and not always the correct one. Kerberos by default always performs a forward and reverse lookup when establishing a ticket. To disable the reverse lookup, create a file in either the default location or in a user specified location and add the following:

  rdns = false

See krb5.conf for more information on the includedir and other kerberos options.You can also supply multiple KDCs for a domain with the Windows ZenPack. This can be done using either a comma separated list in the zWinKDC property or supplying single KDCs for multiple devices or device classes under the /Server/Microsoft device class.This list also supports a simple regex to add, remove, and specify an admin_server.Adding a KDC - Use just the address or append a "+" to the beginning of the address to add a new kdc.Removing a KDC - Append a "-" to the beginning of the KDC address to remove an existing KDC from the krb5.conf file. This can be used if a KDC is no longer in service or if the wrong address was entered previously. This can be removed from zWinKDC once a ticket granting ticket for the user has been obtained and the krb5.conf file is correct.Specifying an admin_server - Optionally, use an asterisk, "*", to denote the admin_server. If none is provided, the first kdc in the list will be used. The admin_server is used for any admin work, such as changing a password through kinit.For example, set zWinKDC to "*,,+,-" for specifying a comma separated list. will be a kdc and admin_server, and will be added as kdcs, and is no longer a valid kdc address and will be removed.Note: Removing one or more errant KDCs from the system can be a time consuming process, so we recommend double-checking that the addresses are valid when entering them into the zWinKDC property.

Viewing Kerberos Tickets

The ZenPack uses individual credential cache files in order to support multiple users across multiple domains. The caches are located in the $ZENHOME/var/krb5c/ directory. The caches for individual users are located in separate files based on the user name. Use klist -c <filename> to view the tickets in the file.While monitoring, we will renew the main kerberos ticket granting ticket 5 minutes before it is set to expire. This will ensure that you receive no "The referenced context has expired" events or errors and will have no collection interruptions due to this error.

Service Impact

When combined with the Zenoss Service Dynamics product, this ZenPack adds built-in service impact capability for services running on Microsoft Windows. The following service impact relationships are automatically added. These will be included in any services that contain one or more of the explicitly mentioned entities.

Service Impact Relationships

The Windows server impacts the following: - File Systems - Processes - Network Routes - Processors - Interfaces - Cluster Services - Cluster Nodes - Cluster Networks - Windows Services - HyperV - SQL Server instances - IIS Sites - Hard Disks

  • Cluster Services impact Cluster Resources.
  • Cluster Interfaces and Disks impact Cluster Nodes.
  • Hard Disks impact File Systems.
  • SQL Server Instances impact SQL Databases, Backups, and Jobs.


Please refer to the Zenoss Service Dynamics documentation if you run into any of the following problems:

  • ZenPack will not install
  • Adding a device fails
  • Don't understand how to add a device
  • Don't understand how to model a device

If you cannot find the answer in the documentation, then Resource Manager (Service Dynamics) users should contact Zenoss Customer Support. Core users can use the #zenoss IRC channel or the forums (there is a forum specific to Windows monitoring).

Troubleshooting Windows

If you see 100% CPU usage on a domain controller and your forest functional level is Windows 2003 or Windows 2008, you could be missing the WinRMRemoteWMIUsers__ security group. Adding this group to your domain should fix this problem. It is a known error from Microsoft, kb 3118385.

Troubleshooting Kerberos Error Messages

Cannot determine realm for numeric host address

  • If you enter an IP address for the device id, make sure that the address is resolvable to a name. Common solutions to this is to use the zWinRMServerName property.

Server not found in Kerberos database

  • More often than not, this error indicates a DNS issue in which the domain controller is unable to locate the specified server by either IP address or name. The best solution varies over different domains and it is left to the user to decide which is best for their environment.
  • One solution is to disable reverse DNS lookups for kerberos. This can be achieved by setting the zWinRMDisableRDNS property to True. If you use this option, you MUST only set it in at the /Server/Microsoft device class level.
  • You should also ensure that the correct name is returned for lookups.
  • If you see "Attempted to get ticket for HTTP@X.X.X.X" where X.X.X.X is an ip address, then try using the zWinRMServerName. To know the exact name by which Active Directory knows this device, you can use setspn -L <hostname>. This will produce a list of service principals with the FQDN of the device.

Preauthentication failed while getting initial credentials.

  • This typically indicates a bad or expired password.

Realm not local to KDC while getting initial credentials

  • This indicates that one or more of the defined KDCs for a domain are incorrect. Add a - to the beginning of the errant KDC address to the beginning of the incorrect address in the zWinKDC property to remove it from the list of KDCs for a domain.

Message stream modified

  • This indicates that Windows was unable to decrypt the kerberos encrypted payload. This will typically occur if the HTTP and/or HTTPS service principal is dedicated to a specific service account. For example, many IIS servers will do this. To fix this, set the zWinUseWsmanSPN property.

Troubleshooting Kerberos Authentication with Wireshark

There are many reasons for kerberos authentication not to work, and a lot of them result in the following unhelpful error message.kerberos authGSSClientStep failed (None)While Zenoss is unable to extract a useful error message when this occurs, it turns out that Wireshark can get useful errors by looking at the kerberos packets sent between Zenoss, your domain controller (zWinKDC) and the monitored Windows server. Let's walk through an example of using Wireshark to resolve an authGSSClientStep failed error.First install Wireshark on your system. It's GUI is easier to use than the command line equivalent.Next you will need to create a packet capture file on your Zenoss collector. Assuming the Windows server you're trying to monitor is and the domain controller (zWinKDC) is, you would run the following command as the root user on your Zenoss collector that is being used to model and monitor the Windows device.

tcpdump -s0 -iany -w kerberdebug.pcap host or host

This will start capturing all packets to or from those two IP addresses. It will continue to capture these packets until you type CTRL-C.Now you should attempt to remodel the Windows server where you're encountering the error. Once it completes, and fails, again you should go back to the terminal where tcpdump is running and type CTRL-C. You will now have a kerberdebug.pcap file in the directory where you ran the command.Copy kerberdebug.pcap to your system where you installed Wireshark. Start Wireshark and open kerberdebug.pcap. You should see something like the following.You'll see that there's a KRB5KRB_AP_ERR_SKEW error. Searching for this specific error code will quickly show that it occurs when the kerberos client and server don't have their time's synchronized. There's a tolerance for some difference, but in this case it was a big difference due to misconfiguration.There are some kerberos errors you'll see in the packets that a completely normal part of negotiation and won't lead to any problems. You should ignore the following errors shown in Wireshark:

  • KRB5KRB_API_ERR_TKT_EXPIRED: Zenoss will subsequently request a new ticket when this occurs.
  • KRB5KRB_ERR_PREAUTH_REQUIRED: This is a normal part of kerberos negotiation.
  • KRB5KRB_ERR_RESPONSE_TOO_BIG: Most requests won't fit in UDP. Zenoss will automatically switch to TCP.

You'll also see other kerberos messages that are normal. You should ignore these kerberos messages shown by Wireshark:

  • AS-REQ

The following are the most common errors: - KRB5KRB_AP_ERR_SKEW: - As shown in the above example. A clock synchronization issue. - KRB5KDC_ERR_S_PRINCIPAL_UNKNOWN - This can happen if zWinRMServerName resolves to the server's IP address, but is not the name the server is known by in Active Directory. This will also be the error if you don't enter a zWinRMServerName and the reverse resolution of the device's manage IP address resolves to a name that doesn't match the server's name in Active Directory. Typical solutions to this are to add the name to the /etc/hosts file or to directly use the IP address of the server.

Troubleshooting Services

If monitoring for one or more services is enabled/disabled on a device and it should be disabled/enabled, use the following: - Refresh the page. - Check how the order of precedence of service monitoring applies to your service(s). - If you have created a template, be sure that you've followed the directions in the Configuring Service Monitoring section and that the Target Class is set to ZenPacks.zenoss.Microsoft.Windows.WinService. - Tick the Update services immediately checkbox on the DefaultService datasource dialog in the /Server/Microsoft/WinService monitoring template and click the Save button so that all services will be reindexed. - Remodel the device to start the reindexing process.

Troubleshooting monitoring

The first step in troubleshooting any monitoring issues is to scan the zenpython log for errors.If you see OperationTimeout errors in the zenpython log, this is normal.
The reason for this is that we run the Get-Counter PowerShell cmdlet over the course of two polling cycles and pull 2 samples by default.
There is a 60 second timeout when attempting to receive data. If the receive request does not finish within 60 seconds, you will see an OperationTimeout. You can decrease zWinPerfmonInterval to a lower value, which will pull samples more frequently.Other timeout issues on a domain could involve having a large Kerberos token. This could be caused by the user belonging to a large number of groups. See kb 970875 for more information on the cause and resolution. Possible side effects of a large token include high CPU usage on the Windows server.If you see a corrupt counters error event, this indicates that the specified counters have been corrupted on the Windows device. No data will be collected for the specified counters until the counters have been repaired on the device and zenpython has been restarted.If you see the following error, check the zenhub log for errors:

Configuration for <device> unavailable -- is that the correct name?

If you see an event stating that a plugin was disabled due to blocking, see the PythonCollector ZenPack documentation for steps to remedy this.If you see 'SNMP agent down - no response received' or 'Unable to read processes' events and would like not to see them, set zSnmpMonitorIgnore to true on the /Server/Microsoft or lower device class, depending on your configuration.

Troubleshooting modeling/monitoring

Version 2.6.0 introduces a command line option to save modeling/monitoring results for troubleshooting. This option will save the results returned from a Windows server from a modeler or datasource plugin. This data can then be viewed/tested using unit tests to determine issues.Usage:

export ZP_DUMP=1;zenmodeler run -d --collect=Interfaces; unset ZP_DUMP

This will unload a pickle of the results to a file in the /tmp folder called Interfaces_process_XXXXXX.pickle.Note: Be sure to unset the environment variable to avoid unwanted pickle files.If you see an event error that shows "The maximum number of concurrent operations for this user has been exceeded", you will need to increase the number of concurrent operations per user in the winrm config. For example:

winrm set winrm/config/service '@{MaxConcurrentOperationsPerUser="4294967295"}'

If you see 'HTTP status: 500. Unexpected Response syntax error: line 1, column 0 (--Encrypted Boundary Content-Type...' events or 'WARNING zen.MicrosoftWindows: receive failure on <device-id>>: syntax error: line 1, column 0' messages in zenpython logs or there is a gradual downfall of available RAM, the value of zWinRMConnectionCloseTime property can be increased.

If you see 'HTTP status: 500. The WS-Management service cannot process the request. The maximum number of concurrent shells for this user has been exceeded...' messages in zenpython logs, MaxShellsPerUser should be increased in WinRM configuration.

Troubleshooting Perfmon Collection

If you see errors containing text similar to "The term 'New-Object' is not recognized as the name of a cmdlet, function, script file, or operable program", this could indicate a problem with the loading of Powershell modules. Zenoss uses common best practice to execute powershell scripts with the -NoProfile option for efficency. Powershell will fall back on the default system PSModulePath in this case. You must ensure that the default PSModulePath environment variable is valid.One common problem seen is a UNC (Universal Naming Convention) path in the default system PSModulePath. If there is a UNC path in the default system path, no modules will load due to double-hopping. Because no modules were loaded, even the most basic powershell cmdlets will not run. To fix this, simply remove the UNC path from the default system PSModulePath environment variable.

Perfmon datasource python plugin invokes long-running Powershell command. When you are observing gaps on graphs, data for which is collected by Perfmon datasource plugin and zenpython debug logs shows 'The WS-Management service cannot complete the operation within the time specified in OperationTimeout' message, zWinRMLongRunningCommandOperationTimeout property value can be increased. This property is applicable only for Perfmon datasource.

Troubleshooting MSSQL Modeling/Monitoring

If you are seeing modeling timeout or datasources not running and have a large number of databases in your SQL Server Instance, check to see if the databases have Auto Close set to True. If so, then consider turning off Auto Close so that our queries to model and monitor the databases can execute in a timely manner.

Zenoss Analytics

This ZenPack provides additional support for Zenoss Analytics. Perform the following steps to install extra reporting resources into Zenoss Analytics after installing the ZenPack.

  1. Copy from $ZENHOME/ZenPacks/ZenPacks.zenoss.Microsoft.Windows/ZenPacks/zenoss/Microsoft/Windows/analytics/ on your Zenoss server.
  2. Navigate to Zenoss Analytics in your browser.
  3. From the Zenoss Instance list of options, select Internal Authentication.
  4. Login as an Analytics user with superuser privileges.
  5. Remove any existing Microsoft Windows ZenPack folder.
    1. Choose Repository from the View menu at the top of the page.
    2. Expand Public in the list of folders.
    3. Right-click on Microsoft Windows ZenPack folder and choose Delete.
    4. Confirm deletion by clicking OK.
  6. Add the new Microsoft Windows ZenPack folder.
    1. Choose Server Settings from the Manage menu at the top of the page.
    2. Choose Import in the left page.
    3. Remove checks from all check boxes.
    4. Click Choose File to import a data file.
    5. Choose the file copied from your Zenoss server.
    6. Click Import.

You can now navigate back to the Microsoft Windows ZenPack folder in the repository to see the following resources added by the bundle.

: Microsoft Windows Domain
Microsoft Cluster Domain
##### Ad Hoc Views
Windows IIS Peak Usage
Windows Interfaces Peak Usage

Domains can be used to create Ad Hoc views using the following steps.

  1. Choose Ad Hoc View from the Create menu.
  2. Click Domains at the top of the data chooser dialog.
  3. Expand Public then Microsoft Windows ZenPack.
  4. Choose the Microsoft Windows Domain domain

Installed Items

Installing this ZenPack will add the following items to your Zenoss system.

Device Classes
Configuration Properties
Modeler Plugins
Datasource Types
Windows EventLog
Windows IIS Site
Windows Perfmon
Windows Process
Windows Service
Windows Shell
Windows PortCheck
Monitoring Templates
Device (in /Server/Microsoft)
FileSystem (in /Server/Microsoft)
HardDisk (in /Server/Microsoft)
ethernetCsmacd (in /Server/Microsoft)
OSProcess (in /Server/Microsoft)
OSProcess-2003 (in /Server/Microsoft)
WinService (in /Server/Microsoft)
Active Directory (in /Server/Microsoft)
Active Directory 2008 (in /Server/Microsoft)
Active Directory 2008R2 (in /Server/Microsoft)
IIS (in /Server/Microsoft)
IISADMIN (in /Server/Microsoft)
IISSites (in /Server/Microsoft)
MSExchangeInformationStore (in /Server/Microsoft)
MSExchange2010IS (in /Server/Microsoft)
MSExchange2013IS (in /Server/Microsoft)
WinDBInstance (in /Server/Microsoft)
WinSQLJob (in /Server/Microsoft)
WinDatabase (in /Server/Microsoft)
Cluster (in /Server/Microsoft)
ClusterService (in /Server/Microsoft/Cluster)
ClusterResource (in /Server/Microsoft/Cluster)
ClusterNode (in /Server/Microsoft/Cluster)
ClusterNetwork (in /Server/Microsoft/Cluster)
ClusterDisk (in /Server/Microsoft/Cluster)
ClusterInterface (in /Server/Microsoft/Cluster)
WinAODatabase (in /Server/Microsoft)
WinAvailabilityGroup (in /Server/Microsoft)
WinAvailabilityReplica (in /Server/Microsoft)



  • Fix numerous WinRM connections spawn (ZPS-7726)
  • Document a new case for zWinRMEnvelopeSize property (ZPS-7787)
  • Tested with Zenoss Cloud, Zenoss 6.6.0, Zenoss 6.5.0 and Service Impact 5.5.3


  • Add MS SQL Always On Availability Groups (ZPS-7363)
  • Add MS SQL Always On Availability Group Replica component (ZPS-7370)
  • Add MS SQL Always On Availability Group Database component(ZPS-7371)
  • Add MS SQL Always On Availability Group Listener component(ZPS-7372)
  • Add support of MS SQL Always On to Zenoss Analytics (ZPS-7511)
  • Add support for Windows 2019 (ZPS-7364)
  • Add support for MSSQL 2019 (ZPS-7365)
  • Model SQL Instances components for MS SQL Always On Availability Groups (ZPS-7366)
  • Add new datapoint for Service component to monitor status change (ZPS-5759)
  • Fix 'Class not registered' and 'Illegal operation attempted on a registry key that has been marked for deletion' errors (ZPS-5967)
  • Fix intermittent connection flood to monitored device (ZPS-6861)
  • Fix intermittent "Server not found in Kerberos database" events (ZPS-7585)
  • Fix 100% CPU utilization on MSSQL servers caused by the ZenPack (ZPS-7586)
  • Fix wincommand notification fails because of Kerberos settings not getting passed to zenactiond container (ZPS-5978)
  • Fix Windows ZP: zenpython krb5.conf is sometimes missing `rdns = false` despite zWinRMKrb5DisableRDNS = True (ZPS-6326)
  • Fix zWinRMDisableRDNS not correctly handled in zenactiond (ZPS-5995)
  • Tested with Zenoss Cloud, Zenoss 6.6.0, Zenoss 6.5.0, Analytics and Service Impact 5.5.3


  • Add zWinServicesModeled and zWinServicesNotModeled properties to control Services component (ZPS-7220)
  • Fix Sysname is discovered as unknown for WinRM devices (ZPS-6244)
  • Fix The datasource "UserConnections" is collecting metrics only for the default SQL instances (ZPS-6946)
  • Add better timeouts control for connections (ZPS-7329)
  • Fix ClusterDataSource collection error (ZPS-7433)
  • Fix blocking code in the Windows ZP monitoring plugin (ZPS-7444)
  • Tested with Zenoss Cloud, Zenoss 6.5.0, Zenoss 6.4.1 and Service Impact 5.5.3


  • Fix Traceback seen for zenoss.winrm.Processes modeler plugin (ZPS-5676)
  • Fix Windows ZP: After upgrade to 2.9.3, seeing "caught returnValue being used in a non-generator" errors (ZPS-5727)
  • Fix Windows - cluster disks may not be modeled or monitored on 2008 cluster when using Powershell v2.0 (ZPS-5755)
  • Fix Unexpected Response --Encrypted Boundary during windows collection (ZPS-5767)
  • Document wincommand notification can be deprecated (ZPS-5501)
  • Fix Receiving 'NoneType' object has no attribute '__getitem__' when modeling Windows device (ZPS-5770)
  • Fix Perfmon command(s) did not start: 'NoneType' object has no attribute 'getConnection' (ZPS-5822)
  • Fix "The referenced context has expired" errors (ZPS-5797)
  • Fix WinRM device modeler fails to model system OS info if Win32_ComputerSystem doesn't return data (ZPS-5820)
  • Fix Windows collection attempts to use a dead connection causing a timeout (ZPS-5819)
  • Fix Cluster Monitoring Doesn't Account for Different Service Names (ZPS-5835)
  • Fix 'Get-Disk' is not recognized on Windows 2008 Clusters (ZPS-5822)
  • Tested with Zenoss Cloud, Zenoss Resource Manager 6.3.2 and Service Impact 5.5.0.


  • Fix deprecated Get-WmiObject cmdlet for PowerShell Core (ZPS-4927)
  • Fix Windows Perfmon data collection stops for long time after device reboot (ZPS-4473)
  • Fix Windows - No freespace on cluster shared volumes (ZPS-4612)
  • Fix Better handling in Perfmon datasource of "is not recognized as the name of a cmdlet" errors (ZPS-3517)
  • Fix 500 Operation Timeout Errors when modeling and/or monitoring SQL Server (ZPS-4638)
  • Fix Windows Cluster - wrong ip address can be returned for sql server node (ZPS-4703)
  • Fix Windows Cluster - sql server fails over doesn't trigger a remodel if cluster group stays the same (ZPS-4707)
  • Fix Windows Perfmon data collection stops for long time after collection interruption (ZPS-4473)
  • Fix Windows may connect to device with wrong zWinRMUser (ZPS-3564)
  • Fix Microsoft.Windows - Detect .NET version better for EventLogDataSource (ZPS-5399)
  • Fix Windows Disconnected Network Drives that Cause PowerShell Error (ZPS-4866)
  • Fix After upgrade to 2.9.x, some/most modeler plugins fail with "'NoneType' object has no attribute 'getConnection'" (ZPS-5087)
  • Fix Windows Cluster - clusterOwnerChange may not be in zWindowsRemodelEventClassKeys after install/upgrade (ZPS-4887)
  • Fix Windows Cluster - SQL Server instance metrics may not be found (ZPS-4888)
  • Fix WindowsServiceLog "The referenced context has expired" error (ZPS-3216)
  • Fix Add ERROR handling for empty win32_SystemEnclsoure data (ZPS-5253)
  • Fix Windows devices monitored over https regularly fail collection (ZPS-5323)
  • Fix Increase Flexibility in Microsoft ZenPack for Data Source using Microsoft's Event Log (ZPS-5585)
  • Fix Windows Cluster - Missing or no data returned when querying job events do not clear after failover remodel (ZPS-4874)
  • Tested with Zenoss Cloud, Zenoss Resource Manager 6.3.2 and Service Impact 5.3.4.


  • Fix applyDataMaps call for onSuccess method destabilizing zenhub (ZPS-4422)


  • Fix Misleading Error when parsing MSSQL status datasource on different cycle than other database datasources (ZPS-3194)
  • Fix Undefined PrimaryOwnerName or RegisteredUser causes traceback in OperatingSystem plugin (ZPS-3227)
  • Fix ShellDataSource slow to gather data when hundreds of databases exist. (ZPS-3287)
  • Fix MSSQL password can be logged in the Windows Event Log as plaintext during query failure (ZPS-3302)
  • Fix MSSQL Monitoring causes thousands of logon/logoff events in windows event log (ZPS-3392)
  • Fix WinMSSQL plugin shows 'message stream modified' errors during modeling.(ZPS-3461)
  • Fix WindowsServiceLog Events never clear.(ZPS-3771)
  • Fix Potential ticket expiry during collection causes collection issue (ZPS-3216)
  • Fix Windows device fails to monitor performance counters, generating several log messages per second. (ZPS-3377)
  • Fix Windows Perfmon data collection stops for long time after device reboot (ZPS-3997)
  • Fix Microsoft.Windows - wrong counter name for 2016 network interfaces (ZPS-3902)
  • Fix wincommand notification fails because of Kerberos settings not getting passed to zenactiond container.(ZPS-3422)
  • Fix WinRM monitoring not properly respecting zWinPerfmonInterval (ZPS-3581)
  • Fix GetWinEvent error message formatting (ZPS-3484)
  • Fix IIS Application Pool states (ZPS-3629)
  • Fix Better handling in Perfmon datasource of "is not recognized as the name of a cmdlet" errors (ZPS-3517)
  • Fix Windows - error regarding missing ipaddress is generated in zenpython log for cluster device (ZPS-4184)
  • Fix WinCluster plugin does not honor zCollectorClientTimeout , always times out requests after 60 seconds (ZPS-4272)
  • Fix Teamed NIC speed not modeled on individual adapters (ZPS-4149)
  • Fix Modeling errors caused by multiple 'zenoss.winrm.WinCluster' in zCollectorPlugins (ZPS-4300)
  • Fix Windows services with certain characters are always in 'unknown' state. (ZPS-3424)
  • Add support for SQL Server 2017
  • Tested with Zenoss Cloud, Zenoss Resource Manager 6.2.0, Zenoss Resource Manager 5.3.3, Zenoss Resource Manager 4.2.5 RPS 743 and Service Impact 5.3.1


  • Fix Windows - IIS 7 or higher may show Unknown site status (ZPS-2728)
  • Fix Windows - Error: local variable 'kerberos' referenced before assignment (ZPS-2738)
  • Fix Quote issue for polling custom event logs (ZPS-2741)
  • Fix Modelling a Windows device fails with trace re: Software Plugin (ZPS-2745)
  • Fix Windows: Tasks building up with bad network connections (ZPS-2829)
  • Fix MicrosoftExchange - N/A for some graphs of Exchange Server component and on Graphs tab (ZPS-2197)
  • Fix Microsoft Windows: zenpython memory increases until restart required (ZPS-2176)
  • Fix CPU use builds over time - PythonCollector MicrosoftWindows (ZPS-2480)
  • Fix Modelling using Kerberos generates two tickets (ZPS-2394)
  • Fix Windows data sources are improperly setting eventClass (ZPS-3056)
  • Fix Windows Event Log Datasource Does not Map Critical Events (ZPS-3109)
  • Fix Windows - an error 'process scan error: list index out of range' is generated for OS Processes component (ZPS-3116)
  • Fix Windows - Do not display None as the Service Pack level (ZPS-2289)
  • Fix Windows - "Check username and password" event still gets generated every cycle even though credentials is correct (ZPS-2712)
  • Add ability to monitor freespace on Cluster Disks (ZPS-582)
  • Tested with Zenoss Resource Manager 5.3.3, 6.1.0, and 6.1.1, Zenoss Resource Manager 4.2.5 RPS 743 and Service Impact 5.2.3


  • Fix Components moving between hosts on a cluster get events as they disappear. (ZPS-2134)
  • Fix Microsoft.Windows: IIS template shows in Device Templates for non-IIS Server (ZPS-2555)
  • Fix Winrs failures (powershell datasources) with "Unknown strategy" message (ZPS-2613)
  • Fix Missing interface counters on non physical adapters (ZPS-2567)
  • Fix WinRS: Failed collection ipaddress missing (ZPS-2645)
  • Fix Windows ZenPack: WinMSSQL may not finish modeling when hundreds of databases exist. (ZPS-2644)
  • Fix Resmgr 5.3.3 upgrade indicates Windows alias is too long (ZPS-2611)
  • Fix Windows: Tasks building up with a bad config (ZPS-2717)
  • Tested with Zenoss Resource Manager 5.3.3 and 6.0.1, Zenoss Resource Manager 4.2.5 RPS 743 and Service Impact 5.2.2


  • Fix Microsoft Windows fails to model 2008 Server Cluster Disks (ZPS-2015)
  • Fix Windows - traceback when no data returned for wmi class win32_computersystem (ZPS-2384)
  • Fix Cluster Disk state always 'Inherited' (ZPS-2416)
  • Fix Unable to monitor MS-SQL Cluser node - see 'Message stream modified' errors (ZPS-2433)
  • Fix Windows ZP - Missing usedFilesystemSpace__bytes alias for Filesystem utilization report (ZPS-2434)
  • Fix MicrosoftWindows - Windows Event Log events that have no detectable severity currently come in as DEBUG, should come in as INFO (ZPS-2453)
  • Fix Microsoft.Windows eight events with same error summary are triggered during modeling (ZPS-2464)
  • Tested with Zenoss Resource Manager 5.3.2, Zenoss Resource Manager 4.2.5 RPS 743 and Service Impact 5.2.2


  • Fix "Error in zenoss.winrm.WinMSSQL: too many values to unpack" (ZPS-2206)
  • Fix Not all bound monitoring templates listed on device overview page (ZPS-2187)
  • Fix cannot concatenate 'str' and 'NoneType' objects" during Lync modeling (ZPS-2203)
  • Fix collection hanging caused by network timeouts by applying fix for twisted bug. (ZPS-1765)
  • Fix 'list' object has no attribute 'lower' (ZPS-2242)
  • Fix Using the exit code for Windows Shell Datasource to generate events can result in a second error. (ZPS-2252)
  • Add an error event threshold added so that we can eliminate error noise on systems with poor connections (ZPS-2068)
  • Fix Windows - No perf data, see "The process cannot access the file because it is being used by another process." in debug log (ZPS-2298)
  • Fix Microsoft Windows fails to model 2008 Server Cluster Disks (ZPS-2015)
  • Fix WinCluster plugin generates duplicate Cluster Disks (ZPS-1932)
  • Update documentation to remove support for SQL Server 2005 (ZPS-2340)
  • Tested with Zenoss Resource Manager 5.3.2, Zenoss Resource Manager 4.2.5 RPS 743 and Service Impact 5.2.2


  • Added SQL Server instance performance counters
  • Added Application Pool Status check for IIS Application Pools
  • Removed WindowsServiceLog, IISSiteStatus, Kerberos, and Authentication event class mappings.
  • Fix Microsoft Windows 2.7.8 pack install without RPS712 breaks zenpack command (ZPS-1729)
  • Fix Microsoft Windows ZenPack floods event server (ZPS-1752)
  • Fix Windows ZenPack: IISSiteStatus transform can result in AttributeError (ZPS-490)
  • Fix collection hanging caused by network timeouts. (ZPS-1765)
  • Fix Shutting down the Zenpython daemon creates unnecessary and or mis-catagorized logging connection failure events in zenpython.log (ZPS-1693, ZPS-1692)
  • Fix Microsoft Windows: zenpython memory usage increases until restart required (ZPS-1584)
  • Fix Newlines in mssql job descriptions cause parse failure. (ZPS-1813)
  • Fix MicrosoftWindows - Cluster component datasources missing default event class (ZPS-1810)
  • Fix ZP Microsoft Windows 2.7.0 - conhost.exe and winrshost.exe are opened without closing (ZPS-1354)
  • Fix zenjobs consumes excessive memory for some actions (ZPS-1783)
  • Fix Windows link to device with no ip instead of cluster node is present in grid of Cluster Nodes component (ZPS-1852)
  • Fix Windows - Loading of SQL Databases is worse in comparison with Zenoss 4.2.5 and Windows 2.6.4 on Zenoss 5.2.1 (ZPS-1154)
  • Fix Windows ZenPack does not show the default sql server name as MSSQLSERVER (ZPS-2031)
  • Fix Multiple zenpython instances on a collector sometimes results in incomplete krb5.conf (ZPS-2072)
  • Update message for DNS lookup failed events (ZPS-1938)
  • Added Windows Shell Custom Command datasources usage with Nagios parser limitations (ZPS-1286).
  • Fix events for IIS Site components (ZPS-2126)
  • Fix malformed sql job results show 'too many values to unpack' error (ZPS-2143)
  • Fix Windows Shell Data Source Sets the Component to an Unconventional Value (ZPS-2055)
  • Fix Unknown Software manufacturers (ZPS-2139). This change fixes the problem only on a new devices. To apply to existing -- please delete Software records manually
  • Fix some software shows up duplicated (ZPS-1245)
  • Tested with Zenoss Resource Manager 5.3.1, Zenoss Resource Manager 4.2.5 RPS 743 and Service Impact 5.1.7


  • Fix HardDisks with a size of 'None' cause unhandled exceptions in modeling (ZPS-1424)
  • Fix Log line for "periodic maintenance" shows in incorrect logs (ZPS-1600)
  • Fix Failed model job does not result in event (ZPS-1608)
  • Fix Performance tables are not created even though performance batch is successful (ZPS-1605)
  • Fix Traceback modelling with WinMSSQL plugin (ZPS-1676)
  • Fix Custom command needs to allow datapoints with non-zero exit codes (ZPS-1366)
  • Fix Shutting down the Zenpython daemon creates unnecessary and or mis-catagorized logging connection failure events in zenpython.log (ZPS-1693)
  • Fix Microsoft Windows - Cluster MSSQL server is at 100% CPU utilization (ZPS-1697)


  • Fix redundant publishing of service state datapoints (ZPS-1604)


  • Fix traceback during modeling (ZPS-1599)


  • Fix Windows ZP uses a lot of RAM when it contains hundreds of components due to checking for IIS (ZPS-1576)
  • Fix Microsoft Windows: zenpython memory usage increases until restart required (ZPS-1584)


  • Fix MicrosoftWindows ZP has problems disks/mount points with "" in their name. (ZPS-1368)
  • Fix Microsoft Windows: Migrate script takes long time to run, no feedback (ZPS-1473)


  • Fix WinRS: Failed collection local variable 'databasename' referenced before assignment on a.device.title (ZPS-1271)
  • Fix ZP Microsoft Windows 2.7.0 - conhost.exe and winrshost.exe are opened without closing (ZPS-1354)
  • Fix Counters with $ in their name are being shown as missing (ZPS-1404)
  • Fix Microsoft Windows: v2.7.x shows errors in zenrelationscan, zenchkrels (ZPS-1442)


  • Fix Microsoft Windows: Honor template severity for MS SQL Instance events (ZPS-1323)
  • Fix Microsoft Windows: Honor template severity for MS SQL Job events (ZPS-1322)
  • Fix Microsoft Windows: Graphs missing datapoints every other zenpython cycle (ZPS-1321)
  • Fix Microsoft Windows: datasource in event details can make the event unreadable on one screen(ZPS-1293)
  • Fix Microsoft Windows: service datapoint should provide timestamp (ZPS-1341)
  • Fix Editing a Windows Service (WinService) Locks Up Zope and Times Out (ZPS-1342)
  • Fix Windows ZP HardDisk Modeler does not check the value of SerialNumber before running strip (ZPS-1279)
  • Fix Windows 2.7.0 WinService migrate script only updates template bound at /Server/Microsoft (ZPS-1280)


  • Added support for Hard Disk association with storage servers
  • Added Session Management to lower number of connections to Windows Servers
  • Added option to specify winrm envelope size
  • Added ability to allow multiple KDCs for single domain
  • Added ability to specify user supplied kerberos configuration directory
  • Added support for Windows Server 2016
  • Added support for SQL Server 2014, 2016
  • Added Paused as valid Windows Service state to monitor
  • Added ability to disable rdns for kerberos
  • Improved support for SQL Server database Status
  • Fix ShellDataSource Doesn't Associate Event Severity or Class from Data Sources (ZPS-491)
  • Fix Modifying the WinService template causes parallel reindexing of the same components (ZPS-570)
  • Fix MicrosoftWindows - Device status become down after adding device using local authentication (ZPS-713)
  • Fix Windows ZP Does not allow compatible ports of 80/443 to be used (ZPS-622)
  • Fix Windows Zenpack may not properly detect IIS on 2012 servers. (ZPS-719)
  • Fix Long MSSQL Database names aren't parsed correctly because they exceed the powershell shell width (ZPS-944)


  • Fix ZenPack throws traceback when non windows data source is added (ZPS-661)


  • Fix Monitoring of SQL Instances results in a UUID error (ZPS-453)
  • Added additional event classes and handlers for Kerberos failures (ZEN-25700)


  • Added Auth event clears, getPingStatus includes /Status/Ping event class (ZEN-25700)
  • Fix Windows Shell Datasources are sending datamaps and bogging down ZenHub (ZEN-26226)


  • Fix TypeError during zenpython collection of a ShellDataSource (ZEN-25978)


  • Added additional event classes to cover connection errors (ZEN-25700)
  • Fix Windows Error Events come across as Info Events (ZEN-24633)
  • Fix Windows ZenPack - No "bad credentials" event for monitoring (ZEN-24726)
  • Fix MSSQL modeling doesn't pick up multiple instances if they're running different versions (ZEN-25851)
  • Fix Auto Creation of Windows Cluster Device doesn't copy over zWinKDC property (ZEN-25564)


  • Fix missing Process Set process title (ZEN-25311)


  • Fix Windows ZenPack incorrectly assumes that the first database returned is the master when modeling databases, backups, and jobs (ZEN-24519)
  • Fix WinRM ZenPack - WinService components disabled at template still show "Monitored" in component view (ZEN-24528)


  • Fix potential "clusternetworks" and "clusternodes" errors after upgrading (ZEN-24401)
  • Fix AttributeError: serviceclass on Windows Services after v515 update (ZEN-24347)
  • Fix duplicated "Interfaces" components after upgrade (ZEN-24401)


  • Fix WinRM ZenPack - Windows Services page elections conflict with WinService template exclusions (ZEN-24165)
  • Fix Modifying the WinService template causes parallel reindexing of the same components (ZEN-24375)


  • Fix Microsoft Windows ZenPack doesn't work with HyperV pack (ZEN-23967)
  • Fix Microsoft Windows: no collection when Processes are modeled (ZEN-24010)
  • Fix Editing a Windows Service (WinService) Locks Up Zope and Times Out (ZEN-23827)


  • Enabled the use of the Infrastructure -> Windows Services page
  • Enabled domain authentication without the need for DNS
  • Added ability to dump results from plugins for troubleshooting
  • Converted to use zenpacklib
  • Document Microsoft Windows Event Log Monitoring Returns Information Events (ZEN-22904)
  • Fix zWinRMServerName not resolving properly on remote collector (ZEN-22880)
  • Fix WinRM ZP Error about concurrent shells doesn't close when not reoccuring (ZEN-23010)
  • Fix Latest version of WinRM pack (2.5.12) causes "AttributeError: in_exclusions" tracebacks (ZEN-23063)
  • Fix WinRM Interface modeler does not account for HP NIC naming scheme (ZEN-20762)
  • Fix WinRM monitoring does not emit message for expired password (ZEN-23183)
  • Fix Windows kinit: Internal credentials cache error while storing credentials while getting initial credentials (ZEN-23238)
  • Fix MSSQL Queries wrong database for metric (ZEN-23228)
  • Fix Windows Service shows 'Up' when down if event class modified (ZEN-19615)
  • Fix Windows Installed on UCS shows 2 interfaces where there's only 1 (ZEN-23379)
  • Fix Windows ZenPack, doesn't send Datasource fields in 'cmd' to Parsers (ZEN-23739)
  • Fix Windows Zenpack Impact relationships are inconsistent (ZEN-18648)
  • Fix WinRMPing datasource should be disabled by default (ZEN-23517)
  • Fix Copy Override of Windows template breaks EventLogDataSource query attribute (ZEN-23157)


  • Fix Active Directory not correctly detected (ZEN-23137)


  • Fix Windows EvenLog Datasource causes CPU 100% utilization (ZEN-20232)
  • Fix Windows Zenpack is improperly setting the Active Directory Template (ZEN-22369)


  • Fix MSSQL Monitoring (ZEN-22476)
  • Document Microsoft Windows: High CPU usage when modeling domain controller (ZEN-22566)
  • Fix Windows Replication datasource fails for dcdiag user formatting (ZEN-22487)
  • Fix Microsoft Windows: failed collection - Couldn't bind: 24: Too many open files. (ZEN-22558)
  • Fix /Status/WinRM/Ping Event Class does not exist (ZEN-22407)


  • Fix Microsoft Windows Cluster datasources are sending datamaps too often and bogging down zenhub (ZEN-22345)


  • Fix Windows Team NIC Monitoring/Modeling Failure (ZEN-19588)


  • Fix ShellDataSource custom command does not send severity to custom parsers (ZEN-21928)


  • Fix Windows traceback during zenpack install (ZEN-21899)


  • Fix MicrosoftWindows - warning is generated if $$ is used in command datasource. (ZEN-20221)
  • Fix No event generated for failed modeling of Windows Device (ZEN-16195)
  • Fix Disabled WinRMService templates continue to event after disabling (ZEN-21603)


  • Fix WinRM Modeling Software Breaks if Installed Software Ends in Underscores(ZEN-20375)
  • Fix Microsoft Windows - monitoring cluster disks results in powershell error (ZEN-21325)
  • Fix Problem while executing plugin zenoss.winrm.FileSystems (ZEN-21351)
  • Fix Microsoft Windows - corrupt counters are not removed from collection (ZEN-21396)
  • Fix WinRM Polling causing partial Event Creation (ZEN-18757)


  • Fix Windows Service monitoring improvements
  • Fix WinRM Ping DataSource marks ping up devices down and stops all collection (ZEN-21270)
  • Fix WinCommand notification fails to run on WinRM ZP 2.5.1, 2.5.3 (ZEN-21272)


  • Fix Microsoft Windows - modeling cluster results in traceback error (ZEN-21242)


  • Fix IIS Site Failed connection when monitoring Windows Server 2012 with IIS 8.5 (ZEN-21029)


  • Fix MicrosoftWindows - Unbound Cluster Error when modeling cluster (ZEN-20931)
  • Fix MicrosoftWindows - list index out of range when modeling processes (ZEN-20932)
  • Fix MicrosoftWindows - Documentation typo mistakes (ZEN-20940)


  • Windows Service monitoring improvements
  • Added State column for MSSQL Databases
  • Improved EventLog querying to allow use of XPath XML
  • Enhancement Microsoft Windows - Update Cluster for failover cluster device (ZEN-18833)
  • Added ability to enter trusted domain information in order to use a single domain user
  • Documentation update: Microsoft Windows - zenpython causes max cpu on target machine (ZEN-20542)
  • Fix Analytics not extracting software data on windows devices (ZEN-19366)
  • Fix Zenoss Windows Monitoring Spawning Thousands of Processes on Monitored Hosts (ZEN-18770)
  • Fix Microsoft Windows ZenPack -> Blank page is displayed when open 'Instance name' link in new page for My SQL Device (ZEN-15464)
  • Fix WinRM - results in "list index out of range" (ZEN-18823)
  • Fix Microsoft Windows ZenPack - MSSQL Databases: Unable to monitor any databases if any databases have ' in name (ZEN-18838)
  • Fix Microsoft Windows - Remove file systems with 0.00B Used/Free Bytes in File Systems component (ZEN-19213)
  • Fix Microsoft Windows - Cluster event is in Unknown class (ZEN-18835)
  • Fix Microsoft Windows - Database event is in Unknown class (ZEN-18836)
  • Fix Microsoft Windows - Provide a better message if using an event log that does not exist (ZEN-19270)
  • Fix Microsoft Windows - Remove IIS from default selected list of plugins (ZEN-19620)
  • Fix Microsoft Windows - an event " WinRS: get-clusterservice : The term 'get-clusterservice' is not recognized..." (ZEN-20138)
  • Fix Microsoft Windows - 'RecoveryModel' property is not displayed for SQL Enterprise 2005 (ZEN-20094)
  • Fix error when modeling hosts with IPv6 addresses. (ZEN-20474)
  • Fix WinRM for Windows server - Device Status should not use /Status/Ping (ZEN-19813)
  • Fix Wiki page for MicrosoftWindows ZenPack - IISAdmin service (ZEN-19300)
  • Fix WinRM Leaves Connections Open When Collection Fails Due to Native Language (ZEN-20514)
  • Fix WinRM - "The referenced context has expired" (ZEN-18115)
  • Fix Microsoft Windows - Windows cluster fails modeling for Task Scheduler traceback (ZEN-20438)


  • Fix Windows ZenPack - Cluster device does not add cluster nodes as devices on model (ZEN-19085)
  • Fix WinService - "list index out of range" error (ZEN-19452)


  • Fix Microsoft Windows Zenpack - MSSQLSERVER service shows as down but received event saying db instance was down (ZEN-19323)


  • Fix Microsoft Windows ZenPack - no data returned for databases in MSSQLSERVER default instance (ZEN-19282)
  • Fix Microsoft Windows ZenPack - services are not being monitored (ZEN-19284)


  • Fix Microsoft Windows ZenPack doesn't create events for MS SQL Jobs/Instances (ZEN-18680)
  • Fix WinRM Polling causing partial Event Creation (ZEN-18757)
  • Fix Microsoft Windows - Connection count is high (ZEN-18947)
  • Fix Microsoft Windows: DCDiag reports Access Denied during tests (ZEN-19188)


  • Fix MSSQL Components Generate Clear Event When PowerShell Script Fails (ZEN-18234)
  • Fix WinRM ZenPack missing thresholds which should be available out-of-box (ZEN-16024)
  • Fix Microsoft Windows - modeling MSSQLSERVER instance on 2012 cluster does not return databases, jobs, backups (ZEN-18811)
  • Fix Microsoft Windows ZenPack - WinMSSQL plugin breaks modeling (ZEN-18533)
  • Windows 2003 will no longer be supported


  • Fix extra points being sent into "Windows Shell" datasource parsers. (ZEN-18049)
  • With the ending of support by Microsoft for Windows 2003, this is the last version of the ZenPack to support Windows 2003.


  • Fix Port Checker in Microsoft Windows ZP 2.4.2 Results in Errors (ZEN-17893)


  • Fix poor performance of SQL Server monitoring of large number of databases. (ZEN-17535)
  • Fix poor performance of SQL Server modeling of large number of databases. (ZEN-17669)


  • Fixed Data from MS Exchange monitoring template is written to MSExchangeIS service component (ZEN-17566)


  • Added DCDiag tests for Active Directory monitoring
  • Added Port checking ability for Active Directory and other monitoring
  • Improved Kerberos error messages
  • Improved Custom Command feedback from Powershell scripts (ZEN-16834)
  • Improved automatic selection of device class monitoring templates to be run (ZEN-17059)
  • Fix Windows service datasource does not clear collection errors (ZEN-16802)
  • Fix EventLogDatasource ignores $max_age (ZEN-16564)
  • Fix Event Log Datasource does not escape tab characters (ZEN-15911)
  • Fix EventLogDataSource processes events from newest to oldest (ZEN-16565)
  • Fix WindowsEventLog will continuously fetch the same events generating false positives if the last event doesn't contain a message/summary (ZEN-17366)
  • Fix IIS-Request Rate graph should be removed from Graphs as it was divided into two (ZEN-17045)
  • Fix txwinrm: Wrong number of arguments given (ZEN-16790)
  • Fix Some software is missing after model (ZEN-16574)
  • Fix OperatingSystem Modeler Broken (ZEN-16799)
  • Fix WinRM Software Modeler Parsing Traceback (ZEN-16224)
  • Fix Windows Zenpack Impact relationships are inconsistent (ZEN-16796)
  • Fix WinRM ZenPack missing thresholds which should be available out-of-box (ZEN-16024)
  • Fix No event generated for failed modeling of Windows Device (ZEN-16195)
  • Fix Microsoft Windows bad counter events in wrong event class (ZEN-16558)
  • Fix link is absent on Owner Node for Cluster/Services and Resources components (ZEN-15784)
  • Fix Microsoft Windows bad counter events in wrong event class (ZEN-16558)
  • Fix No event generated for failed modeling of Windows Device (ZEN-16195)
  • Fix WinRM ZenPack missing thresholds which should be available out-of-box (ZEN-16024)
  • Fix Microsoft.Windows - link is absent on Owner Node for Cluster/Services and Resources components (ZEN-15784)
  • Fix New Windows ZenPack - Working with templates throws 'NoneType' exception (ZEN-17318)
  • Fix Microsoft.Windows - unable to model device using Kerberos authentication on Centos 5 (ZEN-16546)
  • Fix Cannot "View and edit details" on datasource Windows Eventlog (ZEN-17240)


  • Fix traceback during Software modeling (ZEN-16224)
  • Fix Event Log datasource ignoring max age field (ZEN-16564)
  • Fix Event log datasource does not escape tab characters (ZEN-15911)
  • Fix wrong number of arguments given (ZEN-16790)
  • Fix Powershell script not showing feedback on Custom Command datasource (ZEN-16834)
  • Fix traceback during Operating System modeling (ZEN-16799)


  • Fix significant memory leak when using kerberos authentication. (ZEN-16261)
  • Support "Wow6432Node" uninstall key for software inventory. (ZEN-16574)


  • Update Windows Service monitoring template to allow for monitoring by start mode
  • Fix memory leak with kerberos
  • Fix moving device to a different class


  • Fix Windows 2003 modeling/monitoring
  • Add log message during install
  • Re-authenticate through kerberos if connection is broken
  • Small bug fixes


  • Payload encryption over kerberos connections
  • Updated Events to use Get-WinEvent cmdlet
  • Updated Software modeler to query registry instead of Win32_Product
  • Updated FileSystems to show mapped network drives and mounted volumes
  • Support for Zenoss Analytics
  • Numerous bug fixes


  • Zenoss 5 compatibility fixes.


  • Added WinCommand notification action
  • Support for monitoring fail-over clustered MSSQL instances
  • Support for monitoring Windows event logs
  • Numerous bug fixes


  • Support for Service Impact
  • Support for Microsoft Exchange 2010 and Microsoft Exchange 2013
  • Ability to monitor Microsoft SQL Server using Windows Authenticated user
  • Fix Exchange 2007 counters
  • Fix cluster and node relationship
  • Fix virtual network adapter monitoring


  • Reduce possibility of gaps in perfmon collection. ZEN-10600
  • Add zWinRMServerName property. ZEN-9712
  • Support for IIS 7-8 without IIS 6 compatibility.
  • Honor sequence in process monitoring. ZEN-10777
  • Fix cluster modeling for long server names. ZEN-10572
  • Support TALES in Windows Shell custom command script. ZEN-10426
  • Fix custom parser issue with Windows Shell datasource. ZEN-10365
  • Handle null software install date. ZEN-10361
  • Handle null process socket designation. ZEN-10360
  • Model interface speed as integer. ZEN-9608
  • Change WinRS success events from info to clear severity.
  • Fix leaking of active operations on Windows server.
  • Add missing counter details to missing counter events.
  • Fix Windows Shell collection on empty results.
  • Fix Windows Perfmon collection with cycletime > 600.


  • Fix build issue that made ZenPack unavailable from catalog.


  • Eliminate need for manual kerberos configuration on Enterprise Linux 5. ZEN-9389
  • Fix "WinServiceLog: failed collection" error. ZEN-9607
  • Provide more helpful error if AllowUnencrypted is disabled. ZEN-9524


  • Initial release of new Windows support using WinRM instead of DCOM/RPC.